Removal of the Integrally-Lighted Identification Plate

TASK 33-13-42-000-001-A
Removal of the Integrally-Lighted Identification Plate

ZONE: 210
ZONE: 211
ZONE: 212
FIN: 10LF
FIN: 11LF
FIN: 12LF
FIN: 13LF
FIN: 14LF
FIN: 15LF
FIN: 34LF
FIN: 38LF
FIN: 40LF ** ON A/C NOT FOR ALL
FIN: 42LF ** ON A/C NOT FOR ALL
FIN: 43LF ** ON A/C NOT FOR ALL
FIN: 52LF ** ON A/C NOT FOR ALL
FIN: 8LF
FIN: 9LF

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD
211	COCKPIT
212	COCKPIT

C. Referenced Information

REFERENCE	DESIGNATION
Integrally-Lighted Identification Plate ** ON A/C NOT FOR ALL
Integrally-Lighted Identification Plate ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 33-13-42-865-050-A

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/INSTL LT/OVHD/PNL	3LF	Y03

4. Procedure
Subtask 33-13-42-020-050-A

A. Removal of the Integrally-Lighted Identification Plate (8LF)
(1) Loosen the six quarter-turn fasteners (38).
(2) Pull the overhead control and indicating panel 21VU (37).
(3) Remove the six screws (40).
(4) Remove the integrally-lighted identification plate (39).

Subtask 33-13-42-020-051-A ** ON A/C NOT FOR ALL

B. Removal of the Integrally-Lighted Identification Plate (9LF)
(1) Loosen the four quarter-turn fasteners (22).
(2) Pull the overhead control and indicating panel 22VU (21).
(3) Remove the four screws (24).
(4) Remove the integrally-lighted identification plate (23).

Subtask 33-13-42-020-051-B ** ON A/C NOT FOR ALL

B. Removal of the Integrally-Lighted Identification Plate (9LF)
(1) Loosen the four quarter-turn fasteners (22).
(2) Pull the overhead control and indicating panel 22VU (21).
(3) Remove the six screws (24).
(4) Remove the integrally-lighted identification plate (23).

Subtask 33-13-42-020-052-A

C. Removal of the Integrally-Lighted Identification Plate (10LF)
(1) Loosen the two quarter-turn fasteners (18).
(2) Pull the FLT CTL panel 24VU (17).
(3) Remove the two screws (19).
(4) Remove the integrally-lighted identification plate (20).

Subtask 33-13-42-020-053-A

D. Removal of the Integrally-Lighted Identification Plate (11LF), if Installed
(1) Loosen the four quarter-turn fasteners (26).
(2) Pull the overhead control and indicating panel 25VU (25).
(3) Remove the five screws (28).
(4) Remove the integrally-lighted identification plate (27).

Subtask 33-13-42-020-054-A

E. Removal of the Integrally-Lighted Identification Plate (34LF)
(1) Loosen the two quarter-turn fasteners (44).
(2) Pull the flight control panel 23VU (41).
(3) Remove the two screws (42).
(4) Remove the integrally-lighted identification plate (43).

Subtask 33-13-42-020-055-A

F. Removal of the Integrally-Lighted Identification Plate (12LF)
(1) Loosen the four quarter-turn fasteners (30).
(2) Pull the air conditioned panel 30VU (29).
(3) Remove the five screws (32).
(4) Remove the integrally-lighted identification plate (31).

Subtask 33-13-42-020-056-A

G. Removal of the Integrally-Lighted Identification Plate (13LF)
(1) Loosen the four quarter-turn fasteners (34).
(2) Pull the electrical panel 35VU (33).
(3) Remove the five screws (36).
(4) Remove the integrally-lighted identification plate (35).

Subtask 33-13-42-020-057-A

H. Removal of the Integrally-Lighted Identification Plate (14LF)
(1) Loosen the four quarter-turn fasteners (14).
(2) Pull the hydraulic/fuel panel 40VU (13).
(3) Remove the five screws (15).
(4) Remove the integrally-lighted identification plate (16).

Subtask 33-13-42-020-058-A

I. Removal of the Integrally-Lighted Identification Plate (15LF)
(1) Loosen the four quarter-turn fasteners (58).
(2) Pull the overhead control and indicating panel 48VU (57).
(3) Remove the five screws (59).
(4) Remove the integrally-lighted identification plate (60).

Subtask 33-13-42-020-059-A

J. Removal of the Integrally-Lighted Identification Plate (38LF)
(1) Loosen the four quarter-turn fasteners (64).
(2) Pull the reading light panel 54VU (61).
(3) Remove the four screws (62).
(4) Remove the integrally-lighted identification plate (63).

Subtask 33-13-42-020-060-A

K. Removal of the Integrally-Lighted Identification Plate (43LF), if Installed
(1) Loosen the two quarter-turn fasteners (8).
(2) Pull the HFDR control panel 56VU (5).
(3) Remove the two screws (6).
(4) Remove the integrally-lighted identification plate (7).

Subtask 33-13-42-020-061-A

L. Removal of the Integrally-Lighted Identification Plate (52LF), if Installed
(1) Loosen the four quarter-turn fasteners (10).
(2) Pull the cockpit door panel 45VU (9).
(3) Remove the six screws (11).
(4) Remove the integrally-lighted identification plate (12).

Subtask 33-13-42-020-062-A

M. Removal of the Integrally-Lighted Identification Plate (42LF), if Installed
(1) Loosen the four quarter-turn fasteners (46).
(2) Pull the ADIRS panel 41VU (45).
(3) Remove the five screws (47).
(4) Remove the integrally-lighted identification plate (48).

Subtask 33-13-42-020-063-A

N. Removal of the Integrally-Lighted Identification Plate (40LF), if Installed
(1) Loosen the two quarter-turn fasteners (52).
(2) Pull the overhead control and indicating panel 27VU (49).
(3) Remove the two screws (51).
(4) Remove the integrally-lighted identification plate (50).

Subtask 33-13-42-020-064-A

O. Removal of the Integrally-Lighted Identification Plate (39LF), if Installed
(1) Loosen the two quarter-turn fasteners (54).
(2) Pull the fuel panel 51VU (53).
(3) Remove the two screws (55).
(4) Remove the integrally-lighted identification plate (56).

[Rev.10 from 2021] 2026.04.01 00:52:51 UTC