Removal of the Console and Briefcase Light

TASK 33-12-15-000-001-A
Removal of the Console and Briefcase Light

CAUTION: DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS. THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.

ZONE: 190

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
190	BELLY FAIR, AIR CONDITIONING & HYD COMPT

C. Referenced Information

REFERENCE	DESIGNATION
Console and Briefcase Light ** ON A/C NOT FOR ALL
Console and Briefcase Light ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 33-12-15-865-050-A

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/FLOOD/F/O/SIDE	4LE	Z06
122VU	LIGHTING/FLOOD/CAPT/SIDE	5LE	Z05

4. Procedure
Subtask 33-12-15-020-050-A ** ON A/C NOT FOR ALL

A. Removal of the Light
(1) Remove the cover (3) from its housing (1). To do this, put two fingers in the covers notches.
(2) Remove the bulb (2) from the cover (3). To do this, pull the bulb.

Subtask 33-12-15-020-050-B ** ON A/C NOT FOR ALL

A. Removal of the Console and Briefcase Light
(1) Remove the cover (2) from its housing .To do this, put two fingers in the cover notches (1).

CAUTION: MAKE MATCH MARKS ON ALL THE ELECTRICAL WIRES BEFORE YOU DISCONNECT THEM. INCORRECT CONNECTION OF WIRES WILL CAUSE DAMAGE TO EQUIPMENT.

(2) Disconnect the female terminal lugs (3) and (4) from the male terminal lugs (5) and (6).
(3) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.

[Rev.10 from 2021] 2026.04.01 06:00:57 UTC