Removal of the NLG TOWING attachment

TASK 32-21-41-000-001-A
Removal of the NLG TOWING attachment

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SPATULA - NON METALLIC
No specific	AR	WARNING NOTICE(S)

B. Referenced Information

REFERENCE	DESIGNATION
NLG Towing Attachment - Installation

3. Job Set-up
Subtask 32-21-41-941-050-A

A. Safety Precaution
(1) In the cockpit, on the panel 400VU, put the warning notice in position to tell persons not to operate the landing gear control lever.
(2) Put the WARNING NOTICE(S) in position to tell persons not to operate the nose wheel steering system:

on the brake pedals
on the nose wheel steering handwheel (18VU, 19VU).

4. Procedure
Subtask 32-21-41-020-050-A

A. Removal of the NLG Towing Attachment
(1) Remove the rubber sealant with a SPATULA - NON METALLIC to prevent damage to the surface protection.
(2) Remove and discard the cotter pins (6).
(3) Remove the nuts (5), the washers (3) and (4).
(4) Remove the bolts (1) and the washers (2).
(5) Remove the NLG towing attachment (7).

[Rev.10 from 2021] 2026.04.01 00:42:38 UTC