Special Detailed Inspection of Main Landing Gear, Main Fitting comprising: - Main Fitting......

TASK 32-11-00-220-013-A
Special Detailed Inspection of Main Landing Gear, Main Fitting comprising: - Main Fitting......

ZONE: 731
ZONE: 741

1. Reason for the Job
Refer to the MPD TASK: 321141-01
SPECIAL DETAILED INSPECTION OF MAIN LANDING GEAR, MAIN FITTING COMPRISING:
- MAIN FITTING
- UPPER DIAPHRAGM TUBE
- SLIDING TUBE
- LOWER BEARING HOUSING (TWIN WHEEL)

2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
731	L.H MAIN GEAR
741	R.H MAIN GEAR

B. Referenced Information

REFERENCE	DESIGNATION
TASK 32-11-11-000-001-A	Removal of the MLG Leg Assembly
TASK 32-11-11-400-001-A	Installation of the MLG Leg Assembly

3. Job Set-up
Subtask 32-11-00-020-051-A ** ON A/C NOT FOR ALL

A. Removal of the Equipment
(1) Remove the applicable MLG (Ref. AMM TASK 32-11-11-000-001).

4. Procedure
Subtask 32-11-00-220-071-A ** ON A/C NOT FOR ALL

A. Special Detailed Inspection of Main Landing Gear, Main Fitting Comprising:

Main Fitting
Upper Diaphragm Tube
Sliding Tube
Lower Bearing Housing (Twin Wheel)

(1) Send the equipment to the workshop and refer to MPD Appendix 7.

5. Close-up
Subtask 32-11-00-420-051-A ** ON A/C NOT FOR ALL

A. Install the Equipment
(1) Install the applicable MLG (Ref. AMM TASK 32-11-11-400-001).

[Rev.10 from 2021] 2026.04.01 00:39:46 UTC