Removal of the Quantity Indicator

TASK 29-31-21-000-001-A
Removal of the Quantity Indicator

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
197CB

C. Referenced Information

REFERENCE	DESIGNATION
Quantity Indicator

3. Job Set-up
Subtask 29-31-21-865-050-A

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	HYDRAULIC/HYD/QTY/IND	1831GQ	P35

Subtask 29-31-21-010-050-A

B. Open access door 197CB.

4. Procedure
Subtask 29-31-21-020-050-A

A. Removal of the Quantity Indicator
(1) Loosen the screws (1).
(2) Pull the quantity indicator (2) out of the ground service panel (3) of the Green hydraulic system.
(3) Remove the electrical connector (4) from the quantity indicator (2).
(4) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.

[Rev.10 from 2021] 2026.04.01 08:13:56 UTC