Removal of the Collector Tanks of the Seal Drain System

TASK 29-17-11-000-001-A
Removal of the Collector Tanks of the Seal Drain System

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	CONTAINER - HYDRAULIC FLUID RESISTANT
No specific	AR	PLUG - BLANKING

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
196BB

C. Referenced Information

REFERENCE	DESIGNATION
TASK 29-00-00-910-002-A	Safety Procedures of the Hydraulic System
TASK 32-12-00-010-001-A	Open the Main Gear Doors for Access
Collector Tank

3. Job Set-up
Subtask 29-17-11-010-050-A

A. Get Access
(1) Open the access door 196BB.
(2) Open the right main door of the main gear (Ref. AMM TASK 32-12-00-010-001).

Subtask 29-17-11-941-050-A

B. Safety Precautions

WARNING: OBEY THE HYDRAULIC SAFETY PROCEDURES.

(1) Obey the hydraulic safety procedures (Ref. AMM TASK 29-00-00-910-002).
(2) Put a CONTAINER - HYDRAULIC FLUID RESISTANT below the applicable collector tank.

4. Procedure
Subtask 29-17-11-020-050-A

A. Removal of the Collector Tank
(1) Disconnect the pipe end-fitting (1) from the collector tank (3).
(2) Release the clamp (2).
(3) Remove the collector tank (3).
(4) Put the PLUG-BLANKING in each disconnected line end.

[Rev.10 from 2021] 2026.04.01 00:25:28 UTC