W DOC AIRBUS | AMM A320F

Installation/Removal of the Check Pins at Tracks 1-4

TASK 27-50-00-480-801-A
Installation/Removal of the Check Pins at Tracks 1-4

WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON OR NEAR:
  • THE FLIGHT CONTROLS
  • THE FLIGHT CONTROL SURFACES
  • THE LANDING GEAR AND THE RELATED DOORS
  • COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR CAN CAUSE DAMAGE TO THE EQUIPMENT.
1. Reason for the Job
This procedure is applicable during maintenance procedures where the use of the check pins is necessary.
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
98D27508625000
AR
CHECK-PIN TRACK 1-4
 B. Referenced Information
REFERENCE
DESIGNATION
F Installation of the Check Pins at Tracks 1-4 ** ON A/C NOT FOR ALL
F Installation of the Check Pins at Tracks 1-4 ** ON A/C NOT FOR ALL
3. Procedure
Subtask 27-50-00-480-053-A ** ON A/C NOT FOR ALL
A. Installation of the Check Pins at Tracks 1-4
   (1) Use the check pins from the tool-kit 98D27508625000 CHECK-PIN TRACK 1-4 as necessary.
     (a) Install the check pin (1) at track 1.
     (b) Install the check pins (2) at tracks 2-4.
Subtask 27-50-00-480-053-B ** ON A/C NOT FOR ALL
A. Installation of the Check Pins at Tracks 1-4
   (1) Use the check pins from the tool-kit 98D27508625000 CHECK-PIN TRACK 1-4 as necessary.
     (a) Install the check pins (1) at tracks 1-4.
Subtask 27-50-00-080-053-A
B. Removal of the Check Pins from Tracks 1-4
   (1) If necessary, remove the installed check pins from the tracks.
[Rev.10 from 2021] 2026.04.01 06:57:09 UTC
"Aviabrain" 2025