Removal of the CAPT Pedal Assembly

TASK 27-21-42-000-001-A
Removal of the CAPT Pedal Assembly

WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON OR NEAR:

THE FLIGHT CONTROLS
THE FLIGHT CONTROL SURFACES
THE LANDING GEAR AND THE RELATED DOORS
COMPONENTS THAT MOVE.

MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR CAN CAUSE DAMAGE TO THE EQUIPMENT.

ZONE: 120
ZONE: 210

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
120	AVIONICS COMPARTMENT
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

B. Referenced Information

REFERENCE	DESIGNATION
CAPT Pedals
CAPT Pedals

3. Job Set-up
Subtask 27-21-42-860-050-B

DELETED

4. Procedure
Subtask 27-21-42-020-052-A

A. Removal of the Pedal Assembly
(1) Remove the cotter pin (2) and discard it. Remove the nut (5), the bonding strip (4), the washer (3) and the bolt (1) (ref. Detail B).
(2) Remove the cotter pin (25) and discard it. Remove the nut (26), the washer (27) and the bolt (40). Disengage the rod (28) from the bellcrank (41) (Ref. Detail E).

NOTE: Apply a force on the left or right pedal (29) to simulate a brake application. This gives a free passage to the bolts (39) and (40) (Movement of the bellcranks (35) and (41)).

(3) Remove the cotter pin (38) and discard it. Remove the nut (37), the washer (36) and the bolt (39). Disengage the rod (34) from the bellcrank (35) (Ref. Detail E).
(4) Remove the cotter pin (16) and discard it. Remove the nut (15), the washer (14) and the bolt (17). Disengage the rod (12) from the bellcrank (13) (Ref. Detail D).
(5) Remove the cotter pin (6) and discard it. Remove the nut (7), the washer (8) and the bolt (11). Disengage the rod (9) from the bellcrank (10) (Ref. Detail C).
(6) Remove the nuts (33) and discard them. Remove the bolts (31) (Ref. Detail F).
(7) Remove the bushes (30) and remove the pedal assembly (29) from the structure (32).

[Rev.10 from 2021] 2026.03.31 23:48:12 UTC