Visual Inspection of the First Aid Equipment

TASK 25-64-00-200-001-A
Visual Inspection of the First Aid Equipment

ZONE: 200
FIN: 7600MM ** ON A/C NOT FOR ALL
FIN: 7605MM ** ON A/C NOT FOR ALL
FIN: 7605MM1 ** ON A/C NOT FOR ALL
FIN: 7605MM2 ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

3. Job Set-up
Subtask 25-64-00-010-050-A

A. Get Access
(1) Open the applicable stowage compartment(s).
(2) Remove the first aid kit(s) from the stowage compartment(s).
(a) For the locations of the first aid kit(s) refer to the paragraph Component Location of the Description and Operation.

4. Procedure
Subtask 25-64-00-210-050-A

A. Inspection
(1) Examine the hermetic seal of the first aid kits for condition.
(2) Read the label on the first aid kits and make sure that the service-life has not expired.
(3) Replace the first aid kit(s) with new items, if the service-life has expired or the first aid kit(s) is (are) damaged/used.

5. Close-up
Subtask 25-64-00-410-050-A

A. Close Access
(1) Install the first aid kit(s) in the stowage compartment(s).
(2) Close the stowage compartment(s).
(3) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.03.31 23:40:56 UTC