Removal of the Reinforced End Stops for the ACT

TASK 25-52-53-000-002-A
Removal of the Reinforced End Stops for the ACT

ZONE: 150

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT)
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
150	AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
Reinforced End Stop for 2 ACT ** ON A/C NOT FOR ALL
Reinforced End Stops for the ACT ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 25-52-53-010-054-B ** ON A/C NOT FOR ALL

A. Get Access
(1) Open the forward or aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward or aft cargo-compartment door.

4. Procedure
Subtask 25-52-53-020-051-A ** ON A/C NOT FOR ALL

A. Removal of the Reinforced End Stops
(1) Remove and discard the cotter pins (4).
(2) Remove the nuts (5), the washers (6), the bolts (7) and the rollers (2) and remove the reinforced end stops (1) from the roller track (3).

Subtask 25-52-53-020-051-C ** ON A/C NOT FOR ALL

A. Removal of the Reinforced End Stops
(1) Remove and discard the cotter pins (4).
(2) Remove the nuts (5), the washers (6) and the bolts (7) from the reinforced end stop (1).
(3) Remove the reinforced end stop (1) and the roller (2) from the roller track (3).
(4) Remove the plates (8).

[Rev.10 from 2021] 2026.04.01 06:23:21 UTC