DOC AIRBUS | AMM A320FRemoval of the Fixed XZ-Latch for ACT
TASK 25-52-34-000-004-A
Removal of the Fixed XZ-Latch for ACT
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 25-52-34-010-056-A ** ON A/C NOT FOR ALL
Subtask 25-52-34-020-057-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:38:10 UTC
Removal of the Fixed XZ-Latch for ACT
ZONE: 150
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 150 | AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 28-11-27-000-001-A | Removal of the Additional Center Tank (ACT) |
| TASK 52-30-00-860-001-A | Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
| TASK 53-42-14-000-001-A | Removal of the Aft Cargo-Compartment Floor-Panels Zone 150 |
Subtask 25-52-34-010-056-A ** ON A/C NOT FOR ALL
A. Get Access
(1) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the aft cargo-compartment door.
Subtask 25-52-34-010-056-C ** ON A/C NOT FOR ALL (1) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the aft cargo-compartment door.
A. Get Access
(1) Open the forward or aft cargo compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward or aft cargo compartment door.
Subtask 25-52-34-860-059-A ** ON A/C NOT FOR ALL (1) Open the forward or aft cargo compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward or aft cargo compartment door.
B. Aircraft Maintenance Configuration
(1) Remove the applicable ACT (Ref. AMM TASK 28-11-27-000-001).
(2) Remove the floor panels (Ref. AMM TASK 53-42-14-000-001) to get access to the fixed XZ-latches.
Subtask 25-52-34-860-059-B ** ON A/C NOT FOR ALL (1) Remove the applicable ACT (Ref. AMM TASK 28-11-27-000-001).
(2) Remove the floor panels (Ref. AMM TASK 53-42-14-000-001) to get access to the fixed XZ-latches.
B. Aircraft Maintenance Configuration
(1) Remove the applicable Additional Center Tank (ACT) (Ref. AMM D/O 28-11-27-00).
4. Procedure(1) Remove the applicable Additional Center Tank (ACT) (Ref. AMM D/O 28-11-27-00).
Subtask 25-52-34-020-057-A ** ON A/C NOT FOR ALL
A. Removal of the Fixed XZ-Latch
Fixed XZ-Latch for ACT ** ON A/C NOT FOR ALL
Fixed XZ-Latch for Additional Center Tank (ACT) ** ON A/C NOT FOR ALL
(1) Remove and discard the cotter pins (1) from the spindles (4).
(2) Remove the spindles (4) from the fixed XZ-latch (2) and the roller track (3).
(3) Lift and remove the fixed XZ-latch (2) from the roller track (3).
Fixed XZ-Latch for ACT ** ON A/C NOT FOR ALL Fixed XZ-Latch for Additional Center Tank (ACT) ** ON A/C NOT FOR ALL (2) Remove the spindles (4) from the fixed XZ-latch (2) and the roller track (3).
(3) Lift and remove the fixed XZ-latch (2) from the roller track (3).