Removal of the X-Latch

TASK 25-52-34-000-003-A
Removal of the X-Latch

ZONE: 150

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT)
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER
No specific	1	WARNING NOTICE(S)

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
150	AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
X-Latch, FWD Cargo Compartment

3. Job Set-up
Subtask 25-52-34-010-055-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Open the forward and/or aft cargo compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward and/or aft cargo compartment door(s).
(3) Put the WARNING NOTICE(S) on the control panel of the cargo loading system to tell persons not to use it.

Subtask 25-52-34-865-071-A ** ON A/C NOT FOR ALL

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
2000VU	SEMI AUTO CLS-FWD	3MY	E08
2000VU	SEMI AUTO CLS-FWD	2MY	E06
2001VU	SEMI AUTO CLS-AFT	103MY	D08
2001VU	SEMI AUTO CLS-AFT	102MY	D06

4. Procedure
Subtask 25-52-34-020-056-CJ ** ON A/C NOT FOR ALL

A. Removal of the X-Latch on the Latchrail

X-Latch, FWD Cargo Compartment ** ON A/C NOT FOR ALL

(1) Remove the screws (1) and the nuts (2).
(2) Lift and remove the X-latch (4) from the latchrail (3).

[Rev.10 from 2021] 2026.03.31 23:38:07 UTC