Detailed Inspection of Waste Compartment including Waste Flap and Operational Check of Waste Flap

TASK 25-40-00-210-001-A
Detailed Inspection of Waste Compartment including Waste Flap and Operational Check of Waste Flap

ZONE: 200

1. Reason for the Job
Refer to the MPD TASK: 254000-01
DETAILED INSPECTION OF WASTE COMPARTMENT INCLUDING WASTE FLAP AND OPERATIONAL CHECK OF WASTE FLAP
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	LIGHT SOURCE - INSPECTION
No specific	1	MIRROR - INSPECTION

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

C. Referenced Information

REFERENCE	DESIGNATION
Lavatory Waste Container and Waste Chute with Flap

3. Job Set-up
Subtask 25-40-00-010-050-A

A. Get Access

Lavatory Waste Container and Waste Chute with Flap

(1) Open the applicable lavatory door.
(2) Open the waste container access-door.
(3) Remove and clean the waste container.

4. Procedure
Subtask 25-40-00-210-050-A

A. Detailed Inspection of the Waste Compartment, the Waste Flap and Operational Check of the Waste Flap

Lavatory Waste Container and Waste Chute with Flap

(1) Visually examine the waste container compartment, the waste container, the waste flap and the access-door for:

distortion,
cracks,
corrosion,
signs of fire damage,
contamination.

(2) With a MIRROR - INSPECTION and a LIGHT SOURCE - INSPECTION, visually examine the waste chute for:

distortion,
corrosion,
signs of fire damage,
contamination.

(3) Make sure that the waste compartment access door closes and seals correctly.
(4) Operate the waste flap to make sure that the waste flap closes and seals correctly.

5. Close-up
Subtask 25-40-00-410-050-A

A. Close Access

Lavatory Waste Container and Waste Chute with Flap

(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the waste container.
(3) Close the waste container access-door.
(4) Close the lavatory door.

[Rev.10 from 2021] 2026.03.31 23:34:54 UTC