Deactivation of the Toilet Waste-Compartment Access-Door
TASK 25-40-00-040-802-A
Deactivation of the Toilet Waste-Compartment Access-Door
1. Reason for the Job
MMEL 25-40-04A
TOILET WASTE COMPARTMENT ACCESS DOOR
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Referenced Information
3. Job Set-up
Subtask 25-40-00-861-073-A
Subtask 25-40-00-040-051-A
Subtask 25-40-00-410-071-A
[Rev.10 from 2021]
2026.03.31 23:34:49 UTC
Deactivation of the Toilet Waste-Compartment Access-Door
1. Reason for the Job
MMEL 25-40-04A
TOILET WASTE COMPARTMENT ACCESS DOOR
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | WARNING NOTICE(S) |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.05RAB9) | Adhesive Film Tape-- Aluminium Foil - |
| REFERENCE | DESIGNATION |
|---|---|
Subtask 25-40-00-861-073-A
A. There is no special job set-up for this task.
4. ProcedureSubtask 25-40-00-040-051-A
A. Deactivation of the Toilet Waste-Compartment Access-Door
(1) Open the access door of the waste compartment.
(a) Make sure that the waste container is empty.
(2) Seal the opening of the waste chute with Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) .
(3) Put the WARNING NOTICE(S) in position to tell persons not to use the waste compartment.
(4) Seal the access door with Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) .
5. Close-up(1) Open the access door of the waste compartment.
(a) Make sure that the waste container is empty.
(2) Seal the opening of the waste chute with Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) .
(3) Put the WARNING NOTICE(S) in position to tell persons not to use the waste compartment.
(4) Seal the access door with Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) .
Subtask 25-40-00-410-071-A
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close the access door of the waste compartment.
(3) Make an entry in the logbook.
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close the access door of the waste compartment.
(3) Make an entry in the logbook.
Access Door