Deactivation of the Toilet Waste-Compartment Flapper-Door

TASK 25-40-00-040-001-A
Deactivation of the Toilet Waste-Compartment Flapper-Door

ZONE: 200
Task Summary

Access	Test	Specific Tools	Mhr	E/T	Nb Men
NO	NO	NO	0.2	0.2	1

1. Reason for the Job
MMEL 25-40-01A
TOILET WASTE COMPARTMENT FLAPPER DOOR
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	WARNING NOTICE(S)

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.05RAB9)	Adhesive Film Tape-- Aluminium Foil -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

D. Referenced Information

REFERENCE	DESIGNATION
Flapper Door

3. Job Set-up
Subtask 25-40-00-861-056-A

A. There is no special job set-up for this task.

4. Procedure
Subtask 25-40-00-040-050-A

A. Deactivation of the Defective or Missing Waste-Compartment Flapper-Door

Flapper Door

(1) Seal the opening of the waste chute with self adhesive tape Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) .
(2) Put a WARNING NOTICE(S) in position to tell persons not to use the waste compartment.
(3) Open the access door of the waste compartment:
(a) Make sure that the waste container is empty.

5. Close-up
Subtask 25-40-00-410-062-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close the access door of the waste compartment.
(3) Make an entry in the logbook.

[Rev.10 from 2021] 2026.03.31 23:34:47 UTC