DOC AIRBUS | AMM A320FInstallation of the Sliding Window Roller-Blind
TASK 25-13-42-400-001-A
Installation of the Sliding Window Roller-Blind
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
B. Expendable Parts
C. Referenced Information
3. Job Set-up
Subtask 25-13-42-860-051-A
Subtask 25-13-42-420-050-A
Subtask 25-13-42-860-052-A
[Rev.10 from 2021]
2026.03.31 23:29:11 UTC
Installation of the Sliding Window Roller-Blind
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 211 | COCKPIT |
| 212 | COCKPIT |
| FIG.ITEM | DESIGNATION | IPC-CSN |
|---|---|---|
| 5 | O-RINGS | AIPC 25-13-13-01-080 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 56-12-11-010-001-A | Opening of the Cockpit Sliding Windows |
Sliding Window Roller-BlindSubtask 25-13-42-860-051-A
A. Aircraft Maintenance Configuration
(1) Make sure that the sliding window is open (Ref. AMM TASK 56-12-11-010-001).
4. Procedure(1) Make sure that the sliding window is open (Ref. AMM TASK 56-12-11-010-001).
Subtask 25-13-42-420-050-A
A. Installation of the Sliding Window Roller-Blind
(1) Put the new AIPC 25-13-13-01-080 O-RINGS (5) in position.
(2) Put the roller blind (1) in position.
(3) Install the screws (4) and tighten them.
(4) Put the casing (3) in position.
(5) Install the screws (2) and tighten them.
5. Close-up(1) Put the new AIPC 25-13-13-01-080 O-RINGS (5) in position.
(2) Put the roller blind (1) in position.
(3) Install the screws (4) and tighten them.
(4) Put the casing (3) in position.
(5) Install the screws (2) and tighten them.
Subtask 25-13-42-860-052-A
A. Put the aircraft back to its initial configuration.
(1) Close the sliding window (Ref. AMM TASK 56-12-11-010-001).
(2) Make sure that the work area is clean and clear of tools and other items.
(1) Close the sliding window (Ref. AMM TASK 56-12-11-010-001).
(2) Make sure that the work area is clean and clear of tools and other items.