Installation of the Windshield Sunvisor

TASK 25-13-11-400-001-A
Installation of the Windshield Sunvisor

ZONE: 211
ZONE: 212
FIN: 10MM
FIN: 9MM

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT

B. Referenced Information

REFERENCE	DESIGNATION
Windshield Sunvisor

3. Job Set-up
Subtask 25-13-11-860-051-A

A. Aircraft Maintenance Configuration
Not applicable.

4. Procedure
Subtask 25-13-11-420-050-A

A. Installation of the Windshield Sunvisor

CAUTION: WHEN YOU PUT THE SUNVISOR IN THE STORED POSITION, MAKE SURE THAT THE BENT PIN IS CORRECTLY ALIGNED WITH THE CUP NOTCH OF THE SUNVISOR SUPPORT. THIS WILL PREVENT DAMAGE TO THE SUNVISOR.

(1) Install the sunvisor (1).
(2) Install the three screws (2) and tighten them.
(3) Install the clip (4).
(4) Install the screw (5) and tighten it.

5. Close-up
Subtask 25-13-11-860-052-A

A. Put the aircraft back to its initial configuration.
(1) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.03.31 23:28:45 UTC