Inspection/Check of the Third Occupant Seat

TASK 25-11-41-200-001-A
Inspection/Check of the Third Occupant Seat

ZONE: 212
FIN: 14MM

1. Reason for the Job
Visual inspection of seat structure and attachment.
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
212	COCKPIT

3. Job Set-up
Subtask 25-11-41-860-061-A

A. Not Applicable

4. Procedure
Subtask 25-11-41-210-050-A

A. Inspection/Check of the Third Occupant Seat
(1) Make sure that the upholstery of the seat is not worn or damaged.
(2) Make sure that the cushion of the back of the seat is in the correct condition.
(3) Make sure that the seat is not loose and that the fittings are in the correct condition.
(4) Make sure that the holes for the bolts are in the correct condition and have no corrosion.
(5) Make sure that the seat belt and the buckle are in the correct condition.
(6) Make sure that the seat assembly is not loose.
(7) Make sure that the nuts that attach the seat to the partition are in the correct position and have no corrosion.
(8) Make sure that clearance is correct at the control levers.
(9) Make sure that the sideways movement is correct.
(10) Make sure that the headrest operation is correct.
(11) Make sure that the operation of the locking/unlocking system is correct.
(12) Make sure that the retaining pins are not damaged.
(13) Make sure that the seat bottom closes automatically in the vertical position when:

the SEAT UNLOCK control handle is moved up, and
the seat is moved from the utilization position on the aircraft centerline to the stowed position.

[Rev.10 from 2021] 2026.04.01 06:01:32 UTC