Detailed Inspection of G, E and P Routes Installed in the Stair Bay (EWIS)

TASK 24-92-00-220-010-A
Detailed Inspection of G, E and P Routes Installed in the Stair Bay (EWIS)

ZONE: 129

1. Reason for the Job
Refer to the MPD TASK: 200129-03
DETAILED INSPECTION OF G, E AND P ROUTES INSTALLED IN THE STAIR BAY (EWIS)

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	FLASHLIGHT
No specific	AR	MIRROR - INSPECTION, FLEXIBLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
129	STAIR BAY

C. Referenced Information

REFERENCE	DESIGNATION
ESPM 2052120

3. Procedure
Subtask 24-92-00-220-060-A ** ON A/C NOT FOR ALL

A. Detailed Inspection of G, E and P Route Wiring Installed in the Stair Bay
(1) Do a detailed inspection of the wiring to make sure that there is no signs of ageing, alteration, overheating, scaling and deformation ESPM 2052120:
(a) On the AC/DC feeder routes: 1G and 2G.
(b) On the AC/DC power-distribution routes: 1P and 2P.
(c) On the generator excitation routes: 1E and 2E.

NOTE: Use a FLASHLIGHT or a MIRROR - INSPECTION, FLEXIBLE if necessary.

(2) Make sure that there is no dust, lint or hydraulic contamination.

[Rev.8 from Aug 2017] 2026.03.31 23:26:58 UTC