Refuel/Defuel Safety Procedures for use in the Hangar

TASK 12-11-28-650-002-A
Refuel/Defuel Safety Procedures for use in the Hangar

WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON OR NEAR:

THE FLIGHT CONTROLS
THE FLIGHT CONTROL SURFACES
THE LANDING GEAR AND THE RELATED DOORS
COMPONENTS THAT MOVE.

MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR CAN CAUSE DAMAGE TO THE EQUIPMENT.

WARNING: DO NOT SPILL FUEL ON THE ENGINES OR THE BRAKES. IF YOU SPILL FUEL ON ENGINES OR BRAKES THAT ARE HOT, IT CAN CAUSE FIRES.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SAFETY BARRIER(S)
No specific	AR	WARNING NOTICE(S)

3. Job Set-up
Subtask 12-11-28-941-065-A

A. Not Applicable

4. Procedure
Subtask 12-11-28-650-051-A

A. Safety Precautions

WARNING: OBEY THE FUEL SAFETY PROCEDURES.

(1) Open all the hangar doors. Do not close the hangar doors until you have completed the refuel/defuel procedure.
(2) Make the limits of the safety area the limits of the hangar.
(3) Put the SAFETY BARRIER(S) and the "NO SMOKING" WARNING NOTICE(S) at all the hangar entrances.
(4) To be prepared to tow the aircraft out of the hangar for an emergency, do these steps:
(a) Move the equipment which is not necessary for the refuel/defuel procedure from between the aircraft and the hangar exit.
(b) Attach a towing vehicle to the aircraft.
(5) Make sure that the driver of the fuel tanker puts the fuel tanker in the correct position adjacent to the aircraft. Keep the exit of the hangar clear for the fuel tanker.

[Rev.10 from 2021] 2026.04.01 04:29:07 UTC