Installation of the FOTOFOIL Labels

TASK 11-00-00-400-009-A
Installation of the FOTOFOIL Labels

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CLOTH-EMERY (GRADE 360)

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.05EML8)	Epoxy Adhesive-- - Legacy 2
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.08BPA1)	Non Aqueous Cleaner-Non structural use - -

3. Job Set-up
Subtask 11-00-00-110-057-A

A. Cleaning
(1) Roughen the surface on which you will have bond the label, using CLOTH-EMERY (GRADE 360) and clean with Non Aqueous Cleaner-General - - (Material No.08BAA9) or Non Aqueous Cleaner-Non structural use - - (Material No.08BPA1) , then thoroughly dry.

4. Procedure
Subtask 11-00-00-915-058-A

A. Label Installation
(1) Apply a coat of Epoxy Adhesive-- - Legacy 2 (Material No.05EML8) to the surface on which you will bond the label.
(2) Affix the label and apply light pressure to the label for about 30 seconds.

NOTE: When you bond the label on a cylindrical component, temporarily install a tie strap and leave in position until the adhesive compound is fully dry.

5. Close-up
Subtask 11-00-00-942-058-A

A. Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.03.31 22:53:44 UTC