Installation of the ESSO (Scotchcal Labels) in the Presence of Skydrol

TASK 11-00-00-400-008-A
Installation of the ESSO (Scotchcal Labels) in the Presence of Skydrol

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	BRUSH - BRISTLED
No specific	AR	CLOTH-EMERY (GRADE 360)
No specific	AR	SPONGE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.05EML9)	Epoxy Adhesive-- - Legacy 1
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.08BPA1)	Non Aqueous Cleaner-Non structural use - -

3. Job Set-up
Subtask 11-00-00-110-056-A

A. Cleaning
(1) Roughen the surface on which you will bond the label, using CLOTH-EMERY (GRADE 360) and then clean with Non Aqueous Cleaner-General - - (Material No.08BAA9) or Non Aqueous Cleaner-Non structural use - - (Material No.08BPA1) , then thoroughly dry.
(2) Remove the protective backing paper, then remove the adhesive compound with a SPONGE soaked in Non Aqueous Cleaner-General - - (Material No.08BAA9) or Non Aqueous Cleaner-Non structural use - - (Material No.08BPA1) .

4. Procedure
Subtask 11-00-00-915-057-A

A. Label Installation
(1) Using a BRUSH - BRISTLED, apply a coat of Epoxy Adhesive-- - Legacy 1 (Material No.05EML9) .
(2) Affix the label and apply light pressure to the label for about 30 seconds.

5. Close-up
Subtask 11-00-00-942-057-A

A. Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 04:28:03 UTC