Installation of the ESSO (Scotchcal Labels)

TASK 11-00-00-400-007-A
Installation of the ESSO (Scotchcal Labels)

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.05EML7)	Epoxy Adhesive-- - Legacy 3
(Material No.06ABA1)	Polysulfide Sealant-Fuel Tank Brushable -
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.08BPA1)	Non Aqueous Cleaner-Non structural use - -

3. Job Set-up
Subtask 11-00-00-110-055-A

A. Cleaning
(1) Clean the surface on which you will bond the label, using Non Aqueous Cleaner-General - - (Material No.08BAA9) or Non Aqueous Cleaner-Non structural use - - (Material No.08BPA1) , then thoroughly dry.

4. Procedure
Subtask 11-00-00-915-056-A

A. Label Installation
(1) Apply Epoxy Adhesive-- - Legacy 3 (Material No.05EML7) on the contact surface.
(2) Lightly bend the placard to bond it better.
(3) Overlap the edges of the placard with a bead of sealant Polysulfide Sealant-Fuel Tank Brushable - (Material No.06ABA1) .

5. Close-up
Subtask 11-00-00-942-056-A

A. Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 04:28:02 UTC