Installation of the ESSO Labels

TASK 11-00-00-400-006-A
Installation of the ESSO Labels

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	BRUSH - BRISTLED

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.08BPA1)	Non Aqueous Cleaner-Non structural use - -

3. Job Set-up
Subtask 11-00-00-110-054-A

A. Cleaning
(1) Degrease and clean the surfaces on which you will bond the ESSO labels, with Non Aqueous Cleaner-General - - (Material No.08BAA9) or Non Aqueous Cleaner-General - - (Material No.08BAA9) or Non Aqueous Cleaner-Non structural use - - (Material No.08BPA1) then thoroughly dry.

4. Procedure
Subtask 11-00-00-915-055-A

A. ESSO Labels Installation
(1) Remove the protective backing.
(2) Apply a coat of Non Aqueous Cleaner-General - - (Material No.08BAA9) or Non Aqueous Cleaner-Non structural use - - (Material No.08BPA1) to the adhesive film on the back of the label with BRUSH - BRISTLED.
(3) As soon as the adhesive softens and becomes tacky, install the label and press down, specially around the edges.

5. Close-up
Subtask 11-00-00-942-055-A

A. Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 04:28:01 UTC