Installation of the Labels on Heat Resistant Ducting

TASK 11-00-00-400-004-A
Installation of the Labels on Heat Resistant Ducting

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.06CMD9)	Silicone Adhesive Sealant-General Purpose One part legacy
(Material No.08BAA9)	Non Aqueous Cleaner-General - -

3. Job Set-up
Subtask 11-00-00-110-052-A

A. Cleaning
(1) Degrease and clean the surface to which the label is to be affixed using Non Aqueous Cleaner-General - - (Material No.08BAA9) , then thoroughly dry out.

4. Procedure
Subtask 11-00-00-915-053-A

A. Label Installation
(1) Label to be bonded to fabric impregnated with silicone synthetic rubber.
(a) Bond the label with Silicone Adhesive Sealant-General Purpose One part legacy (Material No.06CMD9) as per Vendor"s instructions.
(2) Label to be affixed to fabric impregnated with Viton synthetic rubber.
(a) Apply Silicone Adhesive Sealant-General Purpose One part legacy (Material No.06CMD9) only after the Viton coating has been treated with a bond coat comprising MB primer of the same composition.
(b) Let the primer dry for 30 minutes before you install the label.

5. Close-up
Subtask 11-00-00-942-053-A

A. Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.03.31 22:53:38 UTC