Installation of the Self-Adhesive Placards Affixed to Plexiglas

TASK 11-00-00-400-003-A
Installation of the Self-Adhesive Placards Affixed to Plexiglas

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BBB1)	Non Aqueous Cleaner-- Petroleum Based -

3. Job Set-up
Subtask 11-00-00-110-050-A

A. Cleaning
(1) Clean and degrease the Plexiglas surface on which the placard is to be affixed, using Non Aqueous Cleaner-- Petroleum Based - (Material No.08BBB1) then thoroughly dry out.

NOTE: Any drilling of holes or trimming of the placard shall be performed prior to installation.

4. Procedure
Subtask 11-00-00-915-051-A

A. Installation of Labels
(1) Starting at one end peel off the protective backing paper over 10 mm (0.3937 in.) approx. and fold back.
(2) Affix the peeled end to the Plexiglas and gradually remove the backing paper while pressing the placard down onto the Plexiglas.
(3) Carefully smooth out the placard working from the center outwards.

NOTE: Do not soil the adhesive contact surface of the placard, do not touch this surface with your fingers.

5. Close-up
Subtask 11-00-00-942-052-A

A. Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.03.31 22:53:36 UTC