DOC AIRBUS | AMM A320FGeneral Visual Inspection of Aft Passenger/Crew Doors including Door Stops on Fuselage Door Frames and Door Seals, External Surface (EWIS)
TASK 05-28-30-200-001-A
General Visual Inspection of Aft Passenger/Crew Doors including Door Stops on Fuselage Door Frames and Door Seals, External Surface (EWIS)
1. Reason for the Job
Refer to the MPD TASK: ZL-831-01
GENERAL VISUAL INSPECTION OF AFT PASSENGER/CREW DOORS INCLUDING DOOR STOPS ON FUSELAGE DOOR FRAMES AND DOOR SEALS, EXTERNAL SURFACE (EWIS)
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 05-28-30-010-060-A
Subtask 05-28-30-210-050-A
Subtask 05-28-30-410-060-A
[Rev.10 from 2021]
2026.03.31 22:50:58 UTC
General Visual Inspection of Aft Passenger/Crew Doors including Door Stops on Fuselage Door Frames and Door Seals, External Surface (EWIS)
1. Reason for the Job
Refer to the MPD TASK: ZL-831-01
GENERAL VISUAL INSPECTION OF AFT PASSENGER/CREW DOORS INCLUDING DOOR STOPS ON FUSELAGE DOOR FRAMES AND DOOR SEALS, EXTERNAL SURFACE (EWIS)
NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.
NOTE: This inspection procedure is not applicable to deactivated passenger/crew doors.
2. Job Set-up InformationA. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 832 | AFT PASSENGER/CREW DOOR |
| 842 | AFT PASSENGER/CREW DOOR |
| 832, 842 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 52-10-00-010-001-A | Opening of the Passenger/Crew Door |
| TASK 52-10-00-410-001-A | Closing of the Passenger/Crew Door |
Aft Passenger/Crew Doors which include the Door Stops on Fuselage Door Frames, the Door Seals and the External SurfaceSubtask 05-28-30-010-060-A
A. Get Access
(1) Put an ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position at zone 832 ( 842).
(2) Open aft passenger/crew door 832 ( 842) (Ref. AMM TASK 52-10-00-010-001).
4. Procedure(1) Put an ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position at zone 832 ( 842).
(2) Open aft passenger/crew door 832 ( 842) (Ref. AMM TASK 52-10-00-010-001).
Subtask 05-28-30-210-050-A
A. Inspection
(1) Do a general visual inspection of the aft passenger/crew doors. This inspection includes the door stops on the fuselage door frames, the door seals and the external surface of the doors.
(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations are attached correctly.
5. Close-up(1) Do a general visual inspection of the aft passenger/crew doors. This inspection includes the door stops on the fuselage door frames, the door seals and the external surface of the doors.
(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations are attached correctly.
Subtask 05-28-30-410-060-A
A. Close Access
(1) Close aft passenger/crew door 832 ( 842) (Ref. AMM TASK 52-10-00-410-001).
(2) Remove the access platform(s).
(1) Close aft passenger/crew door 832 ( 842) (Ref. AMM TASK 52-10-00-410-001).
(2) Remove the access platform(s).