GENERAL VISUAL INSPECTION OF BULK CARGO COMPARTMENT DOOR INCLUDING DOOR STOPS ON FUSELAGE DOOR FRAME (EWIS)

TASK 05-28-20-200-006-A
GENERAL VISUAL INSPECTION OF BULK CARGO COMPARTMENT DOOR INCLUDING DOOR STOPS ON FUSELAGE DOOR FRAME (EWIS)

ZONE: 827

1. Reason for the Job
Refer to the MPD TASK: ZL-827-02
GENERAL VISUAL INSPECTION OF BULK CARGO COMPARTMENT DOOR (EWIS)

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
827	BULK CARGO COMPARTMENT DOOR
827

B. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-006-A	Open the Bulk Cargo-Compartment Door
TASK 52-30-00-860-008-A	Close the Bulk Cargo-Compartment Door

3. Job Set-up
Subtask 05-28-20-010-055-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Open the bulk cargo-compartment door 827 (Ref. AMM TASK 52-30-00-860-006).

NOTE: Lift the insulation blankets sufficiently to complete a correct general visual inspection as necessary.

4. Procedure
Subtask 05-28-20-210-055-A ** ON A/C NOT FOR ALL

A. Inspection
(1) Do a general visual inspection of the bulk cargo-compartment door and the stop fittings on the fuselage door frame.
(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations are attached correctly.

5. Close-up
Subtask 05-28-20-410-055-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Close the bulk cargo-compartment door 827. (Ref. AMM TASK 52-30-00-860-008)

[Rev.10 from 2021] 2026.03.31 22:50:54 UTC