GENERAL VISUAL INSPECTION OF AFT CARGO COMPARTMENT DOOR (EWIS)

TASK 05-28-20-200-005-A
GENERAL VISUAL INSPECTION OF AFT CARGO COMPARTMENT DOOR (EWIS)

ZONE: 826

1. Reason for the Job
Refer to the MPD TASK: ZL-826-02
GENERAL VISUAL INSPECTION OF AFT CARGO COMPARTMENT DOOR (EWIS)

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 2M (6 FT)

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
826	AFT CARGO COMPARTMENT DOOR
826AR
826BR, 826CR

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
TASK 52-30-00-860-002-A	Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
Access Panels of the Cargo Compartment Doors ** ON A/C NOT FOR ALL
Access Panels of the Cargo Compartment Doors ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 05-28-20-010-054-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Put an ACCESS PLATFORM 2M (6 FT) in position at the zone 826.
(2) Open the aft cargo-compartment door 826 (Ref. AMM TASK 52-30-00-860-001).
(3) Remove the access panel 826AR and the insulation blanket.

Access Panels of the Cargo Compartment Doors ** ON A/C NOT FOR ALL

Subtask 05-28-20-010-054-C ** ON A/C NOT FOR ALL

Access Panels of the Cargo Compartment Doors ** ON A/C NOT FOR ALL

4. Procedure
Subtask 05-28-20-210-054-A

A. Inspection
(1) Do a general visual inspection of the aft cargo-compartment door.
(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations (wiring, piping) are attached correctly.

5. Close-up
Subtask 05-28-20-410-054-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the insulation blanket and the access panel 826AR.
(3) Close the aft cargo-compartment door 826 (Ref. AMM TASK 52-30-00-860-002).
(4) Remove the access platform(s).

Subtask 05-28-20-410-054-C ** ON A/C NOT FOR ALL

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the insulation blanket and the access panels 826AR, 826BR 826CR.
(3) Close the aft cargo-compartment door 826 (Ref. AMM TASK 52-30-00-860-002).
(4) Remove the access platform(s).

[Rev.10 from 2021] 2026.03.31 22:50:53 UTC