GENERAL VISUAL INSPECTION OF FWD CARGO COMPARTMENT DOOR (EWIS)

TASK 05-28-20-200-004-A
GENERAL VISUAL INSPECTION OF FWD CARGO COMPARTMENT DOOR (EWIS)

ZONE: 825

1. Reason for the Job
Refer to the MPD TASK: ZL-825-02
GENERAL VISUAL INSPECTION OF FWD CARGO COMPARTMENT DOOR (EWIS)

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 2M (6 FT)

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
825	FORWARD CARGO COMPARTMENT DOOR
825, 825AR

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
TASK 52-30-00-860-002-A	Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
Access Panels of the Cargo Compartment Doors ** ON A/C NOT FOR ALL
Access Panels of the Cargo Compartment Doors ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 05-28-20-010-053-A

A. Get Access
(1) Put an ACCESS PLATFORM 2M (6 FT) in position at zone 825.
(2) Open the forward cargo-compartment door 825 (Ref. AMM TASK 52-30-00-860-001).
(3) Remove the access panel 825AR and the insulation.

Access Panels of the Cargo Compartment Doors ** ON A/C NOT FOR ALL

4. Procedure
Subtask 05-28-20-210-053-A

A. Inspection
(1) Do a general visual inspection of the forward cargo-compartment door.
(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations (wiring, piping) are attached correctly.

5. Close-up
Subtask 05-28-20-410-053-A

A. Close Access
(1) Install the insulation and the access panel 825AR.
(2) Close the forward cargo-compartment door 825 (Ref. AMM TASK 52-30-00-860-002).
(3) Remove the access platform(s).

[Rev.10 from 2021] 2026.03.31 22:50:52 UTC