GENERAL VISUAL INSPECTION OF BULK CARGO COMPARTMENT DOOR INCLUDING DOOR STOPS ON FUSELAGE DOOR FRAME (EWIS)

TASK 05-28-20-200-003-A
GENERAL VISUAL INSPECTION OF BULK CARGO COMPARTMENT DOOR INCLUDING DOOR STOPS ON FUSELAGE DOOR FRAME (EWIS)

ZONE: 827

1. Reason for the Job
Refer to the MPD TASK: ZL-827-01
GENERAL VISUAL INSPECTION OF BULK CARGO COMPARTMENT DOOR INCLUDING DOOR STOPS ON FUSELAGE DOOR FRAME (EWIS)

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
827	BULK CARGO COMPARTMENT DOOR
827

B. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-006-A	Open the Bulk Cargo-Compartment Door
TASK 52-30-00-860-008-A	Close the Bulk Cargo-Compartment Door

3. Job Set-up
Subtask 05-28-20-010-052-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Open the bulk cargo-compartment door 827 (Ref. AMM TASK 52-30-00-860-006).

4. Procedure
Subtask 05-28-20-210-052-A ** ON A/C NOT FOR ALL

A. Inspection
(1) Do a general visual inspection of the bulk cargo-compartment door and the stop fittings on the door frame.
(2) Make sure that there are no signs of corrosion, cracks or damage.

5. Close-up
Subtask 05-28-20-410-052-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Close the bulk cargo-compartment door 827. (Ref. AMM TASK 52-30-00-860-008)

[Rev.10 from 2021] 2026.03.31 22:50:50 UTC