GENERAL VISUAL INSPECTION OF FWD CARGO COMPARTMENT DOOR INCLUDING FUSELAGE DOOR SILL, DOOR SEAL AND LOCK FITTINGS, EXTERNAL SURFACE (EWIS)

TASK 05-28-20-200-001-A
GENERAL VISUAL INSPECTION OF FWD CARGO COMPARTMENT DOOR INCLUDING FUSELAGE DOOR SILL, DOOR SEAL AND LOCK FITTINGS, EXTERNAL SURFACE (EWIS)

ZONE: 825

1. Reason for the Job
Refer to the MPD TASK: ZL-825-01
GENERAL VISUAL INSPECTION OF FWD CARGO COMPARTMENT DOOR INCLUDING FUSELAGE DOOR SILL, DOOR SEAL AND LOCK FITTINGS, EXTERNAL SURFACE (EWIS)

NOTE: This task can contribute to fuel savings.

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 2M (6 FT)

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
825	FORWARD CARGO COMPARTMENT DOOR
825

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
TASK 52-30-00-860-002-A	Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump

3. Job Set-up
Subtask 05-28-20-010-050-A

A. Get Access
(1) Put an ACCESS PLATFORM 2M (6 FT) in position at the zone 825.
(2) Open the forward cargo-compartment door 825 (Ref. AMM TASK 52-30-00-860-001).

4. Procedure
Subtask 05-28-20-210-050-A

A. Inspection
(1) Do a general visual inspection of the forward cargo-compartment door. This inspection includes the fuselage door sill, door seal, lock fittings and the external surface of the door.
(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations (wiring, piping) are attached correctly.

5. Close-up
Subtask 05-28-20-410-050-A

A. Close Access
(1) Close the forward cargo-compartment door 825. (Ref. AMM TASK 52-30-00-860-002)
(2) Remove the access platform(s).

[Rev.10 from 2021] 2026.03.31 22:50:48 UTC