GENERAL VISUAL INSPECTION OF MAIN LANDING GEAR CYLINDER DOOR (EWIS)

TASK 05-27-30-200-002-A
GENERAL VISUAL INSPECTION OF MAIN LANDING GEAR CYLINDER DOOR (EWIS)

ZONE: 732
ZONE: 742

1. Reason for the Job

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
732	CYLINDER DOOR
742	CYLINDER DOOR

B. Referenced Information

REFERENCE	DESIGNATION
Main Landing Gear and Doors

3. Job Set-up
Subtask 05-27-30-010-051-A

A. Not Applicable

4. Procedure
Subtask 05-27-30-210-051-A

A. Inspection
(1) Do a general visual inspection of the main-landing-gear cylinder door. This inspection includes the zones 732 and 742.

(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations (wiring) are attached correctly.

5. Close-up
Subtask 05-27-30-410-055-A

A. Close Access
(1) Remove all the fixtures, tools, test and support equipment used during this procedure.

[Rev.10 from 2021] 2026.04.01 04:25:44 UTC