General Visual Inspection of Upper Half of Fuselage

TASK 05-22-00-200-002-A
General Visual Inspection of Upper Half of Fuselage

ZONE: 200

1. Reason for the Job
Refer to the MPD TASK: ZL-200-02
GENERAL VISUAL INSPECTION OF UPPER HALF OF FUSELAGE

NOTE: This is an alternative method for the general visual inspection of the upper half of fuselage.
For the other method, refer to the relevant task in this page block.

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 6M (20 FT)

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

C. Referenced Information

REFERENCE	DESIGNATION
Inspection of the Upper Half of the Fuselage ** ON A/C NOT FOR ALL
Inspection of the Upper Half of the Fuselage ** ON A/C NOT FOR ALL
Inspection of the Upper Half of the Fuselage ** ON A/C NOT FOR ALL
Inspection of the Upper Half of the Fuselage ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 05-22-00-010-053-A

A. Get Access
(1) Put the ACCESS PLATFORM 6M (20 FT) in position at zone 200.

4. Procedure
Subtask 05-22-00-210-051-A

A. Inspection

Inspection of the Upper Half of the Fuselage ** ON A/C NOT FOR ALL

(1) Do a general visual inspection of the external upper half of the fuselage.
(2) Make sure that there are no signs of corrosion, cracks or damage.

5. Close-up
Subtask 05-22-00-410-053-A

A. Close Access
(1) Remove the access platform(s).

[Rev.10 from 2021] 2026.03.31 22:49:08 UTC