GENERAL VISUAL INSPECTION OF HYDRAULIC COMPARTMENT AND FAIRINGS (EWIS)

TASK 05-21-90-200-005-A
GENERAL VISUAL INSPECTION OF HYDRAULIC COMPARTMENT AND FAIRINGS (EWIS)

ZONE: 195
ZONE: 196

1. Reason for the Job
Refer to the MPD TASK: ZL-195-01
GENERAL VISUAL INSPECTION OF HYDRAULIC COMPARTMENT AND FAIRINGS (EWIS)

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT)

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
195	HYDRAULIC COMPT AND FAIRINGS
196	HYDRAULIC COMPT AND FAIRINGS
195BB, 196BB

C. Referenced Information

REFERENCE	DESIGNATION
Hydraulic Compartment Access Doors (195BB and 196BB)

3. Job Set-up
Subtask 05-21-90-010-054-A

A. Get Access
(1) Put an ACCESS PLATFORM 2M (6 FT) in position at zones 195 and 196.
(2) Open the hydraulic reservoir pressurization access-door 195BB and the Yellow hydraulic compartment access-door 196BB.

Hydraulic Compartment Access Doors (195BB and 196BB)

4. Procedure
Subtask 05-21-90-210-054-A

A. Inspection
(1) Do a general visual inspection of the hydraulic compartment and the fairings.
(2) Make sure that there are no signs of corrosion damage, cracks or other damage.
(3) Make sure that all the installations (wiring, ducting, piping) are correctly attached.

5. Close-up
Subtask 05-21-90-410-054-A

A. Close Access
(1) Close the hydraulic reservoir pressurization access-door 195BB and the Yellow hydraulic compartment access-door 196BB.
(2) Remove the access platform(s).

[Rev.10 from 2021] 2026.03.31 22:49:04 UTC