HYD G(Y) ENG 1(2) PUMP LO PR Alert

29-09-03A	HYD G(Y) ENG 1(2) PUMP LO PR Alert

Applicable to: -

- After engine start

Check of the engines pumps:

PTU pb-swOFF

On the HYD SD Page, check that the green and the yellow hydraulic systems pressures are correct.

A correct pressure is 3000 PSI (± 200 PSI).

PTU pb-swAUTO

Note:

On the HYD SD Page, the PTU remains indicated running .

- Taxi

Note:

Due to a false HYD G(Y) ENG 1(2) PUMP LO PR alert displayed on the EWD, the "T.O CONFIG NORMAL” line will not replace the "T.O CONFIG . . TEST" line in the T.O MEMO.

Consider normal configuration for takeoff provided that no alert was displayed during the T.O CONFIG TEST except a false HYD G(Y) ENG 1(2) PUMP LO PR alert.

CAUTION:

The T.O CONFIG TEST pb must be maintained pressed to check that there is no alert except a false HYD G(Y) ENG 1(2) PUMP LO PR alert.