Center Tank Fuel Quantity Indication on the FUEL SD page

28-07-01-05A	Center Tank Fuel Quantity Indication on the FUEL SD page

Applicable to: -

- After Refueling

The FOB may be calculated either using the indications on the refuel control panel (if available) or by using the Manual Magnetic Indicators (MMIs): Refer to FCOM: PER-LOD-FUL-FUEL-C.USE OF MANUAL MAGNETIC INDICATORS (MMI).

- After ENGINE START

Check that /FF is selected on the MCDU FUEL PRED page.

If /FF is not selected on the MCDU FUEL PRED page:

Insert the FOB.

28-07-01-05A	Center Tank Fuel Quantity Indication on the FUEL SD page

Applicable to: -

- After Refueling

- After ENGINE START

Check that /FF is selected on the MCDU FUEL PRED page.

If /FF is not selected on the MCDU FUEL PRED page:

Insert the FOB.

- At Top of Climb

Check on the FUEL SD Page that the fuel is transferred from one additional center tank (from ACT 2 if ACT 2 is installed and not empty) to the center tank.

Check that the fuel quantity in one additional center tank has decreased (from ACT 2 if ACT 2 is installed and not empty).

If the automatic transfer has not started:

After 30 minutes of flight:

ACT pb-swFWD

If necessary perform a descent to 270 FL.

When ACT (both ACTs if two ACTs installed) empty:

ACT pb-swAUTO