DOC AIRBUS | MMEL OPS PROCPermanent Data (TAT, SAT, GLOAD - ALT SEL, UTC, GW) Indications on the SD
| 31-07-02A | Permanent Data (TAT, SAT, GLOAD - ALT SEL, UTC, GW) Indications on the SD |
|---|
Applicable to: -
- During cockpit preparation
Check that the TAT value is operative on the SD permanent data.
If the TAT value is not operative:
Check that the TAT value is available through the ADR 3.
NOTE:
Use the AIR DATA SWITCHING selector to display temporarily the TAT value on the SD.
- In flight
If needed:
The TAT value may be displayed
through the same action on the AIR DATA SWITCHING selector.
| 31-07-02A | Permanent Data (TAT, SAT, GLOAD, UTC, GW) Indications on the SD |
|---|
Applicable to: -
- During cockpit preparation
Check that the TAT value is operative on the SD permanent data.
If the TAT value is not operative:
Check that the TAT value is available through the ADR 3.
NOTE:
Use the AIR DATA SWITCHING selector to display temporarily the TAT value on the SD.
- In flight
If needed:
The TAT value may be displayed
through the same action on the AIR DATA SWITCHING selector.
| 31-07-02A | Permanent Data (TAT, SAT, ISA, GLOAD - ALT SEL, UTC, GW) Indications on the SD |
|---|
Applicable to: -
- During cockpit preparation
Check that the TAT value is operative on the SD permanent data.
If the TAT value is not operative:
Check that the TAT value is available through the ADR 3.
NOTE:
Use the AIR DATA
SWITCHING selector to display temporarily the TAT value on
the SD.
- In flight
If needed:
The TAT value may be displayed through the same action
on the AIR DATA SWITCHING selector.
| 31-07-02A | Permanent Data (TAT, SAT, ISA, GLOAD, UTC, GW) Indications on the SD |
|---|
Applicable to: -
- During cockpit preparation
Check that the TAT value is operative on the SD permanent data.
If the TAT value is not operative:
Check that the TAT value is available through the ADR 3.
NOTE:
Use the AIR DATA
SWITCHING selector to display temporarily the TAT value on
the SD.
- In flight
If needed:
The TAT value may be displayed through the same action
on the AIR DATA SWITCHING selector.