IR 3 (for aircraft without Honeywell 10 MCU ADIRU with IR 3 totally inoperative)
| 34-10-06A | IR 3 (for aircraft without Honeywell 10 MCU ADIRU with IR 3 totally inoperative) |
|---|
Applicable to: -
- Flight preparation/limitations
For aircraft with the RNP AR capability, RNP AR operations are not permitted.
Maximum landing capability is CAT 3 SINGLE.
- During cockpit preparation
- IR 3 mode selectorOFF
NOTE:
- The ADR 3 is consequently set to OFF.
- The F/CTL MAINTENANCE message is displayed on the STATUS SD Page.
| 34-10-06A | IR 3 (for aircraft without Honeywell 10 MCU ADIRU with IR 3 totally inoperative) |
|---|
Applicable to: -
- Flight preparation/limitations
For aircraft with the RNP AR capability, RNP AR operations are not permitted.
Maximum landing capability is CAT 3 SINGLE.
- During cockpit preparation
- IR 3 pb-swOFF
The F/CTL MAINTENANCE is displayed on the STATUS SD Page.
| Note: | When the ADR 3 is inoperative and if the IR 3 pb-sw OFF light does not come on: Set the IR 3 mode selector to OFF. |