Autothrust Instinctive Disconnect
| 22-30-02A | Autothrust Instinctive Disconnect |
|---|
Applicable to: -
The purpose of the procedure is to check
the A/THR disconnection via the remaining Instinctive
Disconnect pb and via the A/THR pb on the FCU.
- After IRS alignment
| Note: | Disregard alerts during the
test. Use the EMER CANCEL pb on the ECAM control panel as necessary. |
Aircraft configuration for the check via the FMS 1:
- ENG/FADEC GND PWR 1 and 2ON
- Both thrust leversMCT
- FDOff
- AUTO FLT/FMGC/2 (121 VU M17) C/BPull
- A/THROn
Check that green SPEED and white
A/THR indications appear on the PFD.
Check that A/THR pb light
bars are ON.
Check of the A/THR disconnection via the remaining Instinctive Disconnect pb:
- A/THR instinctive disconnect pb (non affected autothrust)Push
Check that the A/THR pb light bars are OFF.
Check that green SPEED and white
A/THR indications are no more displayed on the PFD.
- A/THROn
Check that the A/THR pb light bars are ON.
Check that green SPEED and white
A/THR indications are displayed on the PFD.
Check of the A/THR disconnection via the A/THR pb on the FCU:
- A/THR pb (on the FCU)Off
Check that the A/THR pb light bars are OFF.
Check that green SPEED and white
A/THR indications are no more displayed on the PFD.
- A/THROn
Aircraft configuration for the check via the FMS 2:
- AUTO FLT/FMGC/2 (121VU M17) C/BPush
- AUTO FLT/FMGC/1 (49VU B02) C/BPull
Wait 2 min.
Check of the A/THR disconnection via the remaining Instinctive Disconnect pb:
- A/THR instinctive disconnect pb (non affected autothrust)Push
Check that the A/THR pb light bars are OFF.
Check that green SPEED and white
A/THR indications are no more displayed on the PFD.
- A/THROn
Check that the A/THR pb light bars are ON.
Check that green SPEED and white
A/THR indications are displayed on the PFD.
Check of the A/THR disconnection via the A/THR pb on the FCU:
- A/THR pb (on the FCU)Off
Check that the A/THR pb light bars are OFF.
Check that green SPEED and white
A/THR indications are no more displayed on the PFD.
- A/THROn
Restore normal aircraft configuration:
- A/THROff
- AUTO FLT/FMGC/1 (49VU B02) C/BPush
- ENG/FADEC GND PWR 1 and 2Off
- Both thrust leversIDLE
- RCL pb (on the ECAM control panel)Push
Wait 2 min before
using the MCDU and the FD.