Take-over AP Disconnection Function (One inoperative)
| 22-10-04A | Take-over AP Disconnection Function (One inoperative) |
|---|
Applicable to: -
- Flight preparation/Limitations
Maximum landing capability is CAT 1.
- Before engine start
- AP 1On
- Operative take-over pbPress
Check that the red AP OFF message
is displayed on the EWD.
- AP 2On
- Operative take-over pbPress
Check that the red AP OFF message
is displayed on the EWD.
- Before approach
If the AP is used for approach:
The operative AP disconnect pb must be assigned to the PF.