EPR Control Mode

73-20-04A	EPR Control Mode

Applicable to: -

- General information

The autothrust function is inoperative.

α floor is not available.

β target is not available.

(If Installed) Bump is inoperative.

- Flight preparation/Limitations

Takeoff performance:

The following method may be used for takeoff performance determination if no takeoff data (Predetermined by using OCTOPUS program or other equivalent program with present failure case taken into account) is available.

Launch PEP.

Single engine cruise:

See "N1 MODE THRUST CONTROL" in Refer to FCOM: PER-THR-N1 MODE THRUST CONTROL.

Go-Around performance:

See "N1 MODE THRUST CONTROL" in Refer to FCOM: PER-THR-N1 MODE THRUST CONTROL.

- Before engine start

ENG 1 N1 MODE pb-swON

ENG 2 N1 MODE pb-swON

- For Takeoff

Flexible takeoff is not permitted.