Check of the Starter Valve Manual Handle Position after Engine Start [CFMI]

TASK 80-11-00-040-040-A
Check of the Starter Valve Manual Handle Position after Engine Start

FIN: 1000EM1 ** ON A/C NOT FOR ALL
FIN: 1000EM2 ** ON A/C NOT FOR ALL

1. Reason for the Job
MMEL 80-07-01A
START VALVE POSITION INDICATION ON THE ENGINE SD PAGE
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	WARNING NOTICE(S)

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
FOR [1000EM1] (ENGINE-1)
438CR
FOR [1000EM2] (ENGINE-2)
448CR

C. Referenced Information

REFERENCE	DESIGNATION
Starter Valve Acess Door
Starter Valve

3. Job Set-up
Subtask 80-11-00-010-052-A ** ON A/C NOT FOR ALL

A. Open the access door on fan cowl :

Starter Valve Acess Door ** ON A/C NOT FOR ALL

(1) FOR [1000EM1] (ENGINE-1)
438CR
(2) FOR [1000EM2] (ENGINE-2)
448CR

4. Procedure
Subtask 80-11-00-210-053-A ** ON A/C NOT FOR ALL

A. After engine start cycle check on starter valve that the manual handle is in closed position.

Starter Valve ** ON A/C NOT FOR ALL

5. Close-up
Subtask 80-11-00-410-052-A ** ON A/C NOT FOR ALL

A. Close the access door on fan cowl

Starter Valve Acess Door ** ON A/C NOT FOR ALL

(1) FOR [1000EM1] (ENGINE-1)
438CR
(2) FOR [1000EM2] (ENGINE-2)
448CR

Subtask 80-11-00-941-052-A ** ON A/C NOT FOR ALL

B. Safety Precautions
(1) Install a WARNING NOTICE(S) in the cockpit to tell the persons that the starter valve 1 (2) indicating system is inoperative.
(2) Tell the crew to make an entry in the logbook.

[Rev.10 from 2021] 2026.04.01 03:43:59 UTC