Visual Inspection of the TRF Vibration Sensor [CFMI]

TASK 77-31-30-210-001-A
Visual Inspection of the TRF Vibration Sensor

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	PLIERS - CONNECTOR, JAW, SOFT
No specific	AR	WARNING NOTICE(S)

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
FOR [1000EM1] (ENGINE-1)
437AL, 438AR, 451AL, 452AR
FOR [1000EM2] (ENGINE-2)
447AL, 448AR, 461AL, 462AR

C. Referenced Information

REFERENCE	DESIGNATION
TASK 71-13-00-010-040-A	Opening of the Fan Cowl Doors
TASK 71-13-00-410-040-A	Closing of the Fan Cowl Doors
TASK 77-31-30-000-001-A	Removal of the Turbine Rear Frame Vibration Sensor
TASK 77-31-30-400-001-A	Installation of the Turbine Rear Frame Vibration Sensor
TASK 78-30-00-081-041-A	Make the Thrust Reverser Serviceable after Maintenance
TASK 78-30-00-481-041-A	Make the Thrust Reverser Unserviceable for Maintenance
TASK 78-36-00-010-040-A	Opening of the Thrust Reverser Doors
TASK 78-36-00-410-040-A	Closing of the Thrust Reverser Doors
Visual Inspection of the TRF Vibration Sensor

3. Job Set-up
Subtask 77-31-30-941-052-A ** ON A/C NOT FOR ALL

A. Safety Precautions
(1) On the center pedestal, on the ENG panel 115VU:
(a) Put a WARNING NOTICE(S) to tell persons not to start the engine.
(2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
(3) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a WARNING NOTICE(S) to tell persons not to energize the FADEC 1(2).

Subtask 77-31-30-010-052-A ** ON A/C NOT FOR ALL

B. Open the left fan cowl doors: (Ref. AMM TASK 71-13-00-010-040)
(1) FOR [1000EM1] (ENGINE-1)
437AL
(2) FOR [1000EM2] (ENGINE-2)
447AL

Subtask 77-31-30-040-052-A ** ON A/C NOT FOR ALL

C. Make the thrust reverser unserviceable (Ref. AMM TASK 78-30-00-481-041).

Subtask 77-31-30-010-055-A ** ON A/C NOT FOR ALL

D. Open the left thrust-reverser doors: (Ref. AMM TASK 78-36-00-010-040)
(1) FOR [1000EM1] (ENGINE-1)
451AL
(2) FOR [1000EM2] (ENGINE-2)
461AL

4. Procedure
Subtask 77-31-30-210-050-A ** ON A/C NOT FOR ALL

A. Visual Inspection of the TRF Vibration Sensor:
(1) Disconnect the aircraft harness from the TRF sensor connector. Use PLIERS - CONNECTOR, JAW, SOFT only if necessary.

INSPECT/CHECK	MAXIMUM SERVICEABLE LIMITS	REMARKS
1.Examine the sensor accelerometer for:
A.Cracks in mounting flange	Not permitted	Replace TRF vibration sensor (Ref. AMM TASK 77-31-30-000-001) and (Ref. AMM TASK 77-31-30-400-001).
2.Examine all the attachment points of the sensor to the engine for:
A.Loose bolts (accelerometer and lead)	Not permitted	TORQUE bolts as told in installation topic (Ref. AMM TASK 77-31-30-400-001)
B.Loose screws, missing half plate , broken or missing lockwire (connector end)	Not permitted	TORQUE screws, install half plate and lockwire as told in installation topic (Ref. AMM TASK 77-31-30-400-001)
3.Examine the braid of the lead for:
A.Chafing (wear) or fraying	Not permitted	Replace TRF vibration sensor (Ref. AMM TASK 77-31-30-000-001) and (Ref. AMM TASK 77-31-30-400-001)

(2) Make sure that the connectors are clean and clear of unwanted materials.
(3) Connect the aircraft harness to the TRF sensor. Use PLIERS - CONNECTOR, JAW, SOFT only if necessary.

5. Close-up
Subtask 77-31-30-410-052-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close the left thrust-reverser doors: (Ref. AMM TASK 78-36-00-410-040)
(a) FOR [1000EM1] (ENGINE-1)
452AR
(b) FOR [1000EM2] (ENGINE-2)
462AR

Subtask 77-31-30-440-051-A ** ON A/C NOT FOR ALL

B. Make the thrust reverser serviceable (Ref. AMM TASK 78-30-00-081-041)

Subtask 77-31-30-410-054-A ** ON A/C NOT FOR ALL

C. Close Access
(1) Close the left fan cowl doors: (Ref. AMM TASK 71-13-00-410-040)
(a) FOR [1000EM1] (ENGINE-1)
438AR
(b) FOR [1000EM2] (ENGINE-2)
448AR
(2) Remove the WARNING NOTICE(S).

[Rev.10 from 2021] 2026.04.02 06:37:38 UTC