Read of the N1, N2 and EGT Max Pointers [CFMB]

TASK 77-00-00-710-043-A
Read of the N1, N2 and EGT Max Pointers

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 31-32-00-860-001-A	Procedure to Get Access to the SYSTEM REPORT/TEST Menu Page
TASK 31-60-00-860-001-A	EIS Start Procedure
TASK 31-60-00-860-002-A	EIS Stop Procedure
MCDU Display

3. Job Set-up
Subtask 77-00-00-860-058-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-861-002).
(2) Do the EIS start procedure (Upper and Lower ECAM DUs only) (Ref. AMM TASK 31-60-00-860-001).
(3) Get access to the SYSTEM REPORT TEST page (Ref. AMM TASK 31-32-00-860-001).

4. Procedure
Subtask 77-00-00-710-054-B ** ON A/C NOT FOR ALL

A. Do these tests:

ACTION	RESULT
1.Push the line key adjacent to INST	The INST menu comes into view
2.Push the line key adjacent to EIS1	EIS (DMC1) page comes into view. On the PFD, ND CAPT side and upper ECAM display unit MAINTENANCE MODE comes into view. Ignore the ECAM warnings.
3.Push the line key adjacent to PIN PROG/STATUS AND XLOAD	The EIS (DMC1) PIN PROG/STATUS AND XLOAD shows.
4.Push the line key adjacent to ENGINES	The EIS (DMC1) ENGINE OVER SPD/TEMP shows.
5.Push the line key adjacent to the desired Max Values	The page comes into view to show the Max values reached during the last flight leg.
6.Push the line key adjacent to RETURN until the CFDS MENU comes into view.	The CFDS MENU comes into view.
7.Stop the MCDU

5. Close-up
Subtask 77-00-00-860-059-A ** ON A/C NOT FOR ALL

A. Do the EIS stop procedure: (Ref. AMM TASK 31-60-00-860-002).

Subtask 77-00-00-862-054-A ** ON A/C NOT FOR ALL

B. De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002).

[Rev.10 from 2021] 2026.04.02 06:37:39 UTC