Installation of the Engine Interface Unit (EIU) [IAE]

TASK 73-25-34-400-041-A
Installation of the Engine Interface Unit (EIU)

FIN: 1KS1 ** ON A/C NOT FOR ALL
FIN: 1KS2 ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
824

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-41-00-410-002-A	Close the Avionics Compartment Doors after Access
TASK 73-25-34-710-042-A	Operational Test of the EIU with the CFDS
Engine Interface Unit

3. Job Set-up
Subtask 73-25-34-010-054-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Make sure that the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position.
(2) Make sure that the access door 824 is open.

Subtask 73-25-34-865-062-A ** ON A/C NOT FOR ALL

WARNING: BEFORE YOU OPEN PHC CIRCUIT BREAKERS 2DA1(2,3), OPEN PROBE HEATER CIRCUIT-BREAKERS 1DA1(2), 3DA1(2,3), 4DA1(2,3) AND 5DA1(2,3). IF YOU DO NOT OBEY THIS SEQUENCE: - THE PROBES WILL BECOME TOO HOT. - THIS CAN CAUSE DAMAGE TO EQUIPMENT AND INJURY TO MAINTENANCE PERSONNEL.

WARNING: OPEN CIRCUIT BREAKERS 2KS1 AND 2KS2 AFTER YOU OPEN THE IGNITION CIRCUIT BREAKERS. IF NOT, THE CONTINUOUS IGNITION SYSTEM WILL BE ACTIVATED.

B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	ANTI ICE/PROBES/AOA/1	4DA1	D04
49VU	ANTI ICE/PROBES/PITOT/1	3DA1	D02
49VU	ANTI ICE/RAIN/RPLNT/CAPT	1DB1	D01
49VU	COM/CVR/SPLY	23RK	E14
49VU	COM/CVR/CTL	26RK	E13
121VU	RCDR/DFDR	7TU	K16
122VU	ANTI ICE/WINDOWS/R	4DG2	W14
122VU	ANTI ICE/RAIN/RPLNT/F/O	1DB2	W11
122VU	ANTI ICE/WINDOWS/L	4DG1	X14
122VU	ANTI ICE/PROBES/2/TAT	1DA2	Y15
122VU	ANTI ICE/PROBES/2/PITOT	3DA2	Y14
122VU	ANTI ICE/PROBES/2/AOA	4DA2	Y13
122VU	ANTI ICE/PROBES/2/STATIC	5DA2	Y11
122VU	ANTI ICE/PROBES/3/PITOT	3DA3	Z16
122VU	ANTI ICE/PROBES/3/AOA	4DA3	Z15
122VU	ANTI ICE/PROBES/3/STATIC	5DA3	Z14
122VU	ANTI ICE/PROBES/1/STATIC	5DA1	Z13
122VU	ANTI ICE/PROBES/1/TAT	1DA1	Z12
FOR FIN: 1KS1 (EIU1)
49VU	ENGINE/1/FADEC A/AND EIU 1	2KS1	A04
49VU	ENGINE/1 AND 2/IGN/SYS A	1JH	A03
121VU	ENGINE/IGN/ENG1/SYS B	3JH1	P41
121VU	ENGINE/IGN/ENG1/SYS A BAT	2JH1	P39
121VU	ENGINE/ENG1/FADEC B/AND EIU 1	4KS1	R41
FOR FIN: 1KS2 (EIU2)
49VU	ENGINE/2/FADEC A/AND EIU 2	2KS2	A05
49VU	ENGINE/1 AND 2/IGN/SYS A	1JH	A03
121VU	ENGINE/IGN/ENG2/SYS B	3JH2	P42
121VU	ENGINE/IGN/ENG2/SYS A BAT	2JH2	P40
121VU	ENGINE/ENG2/FADEC B	4KS2	Q40

Subtask 73-25-34-865-087-A ** ON A/C NOT FOR ALL

WARNING: OPEN THE PROBE HEATER AND WINDOW HEATER CIRCUIT-BREAKERS BEFORE YOU OPEN THE PHC AND WHC CIRCUIT BREAKERS. IF YOU DO NOT OBEY THIS SEQUENCE:

THE PROBES WILL BECOME TOO HOT.
THIS CAN CAUSE DAMAGE TO EQUIPMENT AND INJURY TO MAINTENANCE PERSONNEL.

C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	ANTI ICE/PROBES/PHC/1	2DA1	D03
122VU	ANTI ICE/WHC/2	5DG2	W13
122VU	ANTI ICE/WHC/1	5DG1	X13
122VU	ANTI ICE/PROBES/PHC/3	2DA3	Y16
122VU	ANTI ICE/PROBES/PHC/2	2DA2	Y12

4. Procedure
Subtask 73-25-34-420-052-A ** ON A/C NOT FOR ALL

A. Installation of the Engine Interface.
(1) Remove the blanking caps and make sure that the electrical connectors (6) and (7) are in good condition.
(2) Put the engine interface unit (1) in its support (2).
(3) Push the engine interface unit (1) with the handle (3) until the connector (6) engages correctly.
(4) Engage the knurled nuts (5) in the hooks (4) and tighten them.

Subtask 73-25-34-942-054-A ** ON A/C NOT FOR ALL

B. Make sure that the work area is clean and clear of tools and other items.

Subtask 73-25-34-865-088-A ** ON A/C NOT FOR ALL

WARNING: CLOSE THE PHC AND WHC CIRCUIT BREAKERS BEFORE YOU CLOSE THE PROBE HEATER AND WINDOW HEATER CIRCUIT-BREAKERS. IF YOU DO NOT OBEY THIS SEQUENCE:

THE PROBES WILL BECOME TOO HOT.
THIS CAN CAUSE DAMAGE TO EQUIPMENT AND INJURY TO MAINTENANCE PERSONNEL.

C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	ANTI ICE/PROBES/PHC/1	2DA1	D03
122VU	ANTI ICE/WHC/2	5DG2	W13
122VU	ANTI ICE/WHC/1	5DG1	X13
122VU	ANTI ICE/PROBES/PHC/3	2DA3	Y16
122VU	ANTI ICE/PROBES/PHC/2	2DA2	Y12

Subtask 73-25-34-865-063-A ** ON A/C NOT FOR ALL

D. Remove the safety clips and tags and close these circuit breakers in this sequence:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
122VU	ANTI ICE/PROBES/1/TAT	1DA1	Z12
122VU	ANTI ICE/PROBES/2/TAT	1DA2	Y15
49VU	ANTI ICE/PROBES/PITOT/1	3DA1	D02
122VU	ANTI ICE/PROBES/2/PITOT	3DA2	Y14
122VU	ANTI ICE/PROBES/3/PITOT	3DA3	Z16
49VU	ANTI ICE/PROBES/AOA/1	4DA1	D04
122VU	ANTI ICE/PROBES/2/AOA	4DA2	Y13
122VU	ANTI ICE/PROBES/3/AOA	4DA3	Z15
122VU	ANTI ICE/PROBES/1/STATIC	5DA1	Z13
122VU	ANTI ICE/PROBES/2/STATIC	5DA2	Y11
122VU	ANTI ICE/PROBES/3/STATIC	5DA3	Z14
49VU	ANTI ICE/RAIN/RPLNT/CAPT	1DB1	D01
122VU	ANTI ICE/RAIN/RPLNT/F/O	1DB2	W11
122VU	ANTI ICE/WINDOWS/L	4DG1	X14
122VU	ANTI ICE/WINDOWS/R	4DG2	W14
121VU	RCDR/DFDR	7TU	K16
49VU	COM/CVR/SPLY	23RK	E14
49VU	COM/CVR/CTL	26RK	E13
FOR FIN: 1KS1 (EIU1)
49VU	ENGINE/1/FADEC A/AND EIU 1	2KS1	A04
121VU	ENGINE/ENG1/FADEC B/AND EIU 1	4KS1	R41
49VU	ENGINE/1 AND 2/IGN/SYS A	1JH	A03
121VU	ENGINE/IGN/ENG1/SYS A BAT	2JH1	P39
121VU	ENGINE/IGN/ENG1/SYS B	3JH1	P41
FOR FIN: 1KS2 (EIU2)
49VU	ENGINE/2/FADEC A/AND EIU 2	2KS2	A05
121VU	ENGINE/ENG2/FADEC B	4KS2	Q40
49VU	ENGINE/1 AND 2/IGN/SYS A	1JH	A03
121VU	ENGINE/IGN/ENG2/SYS A BAT	2JH2	P40
121VU	ENGINE/IGN/ENG2/SYS B	3JH2	P42

Subtask 73-25-34-710-061-A ** ON A/C NOT FOR ALL

E. Do an operational test of the Engine Interface Unit (Ref. AMM TASK 73-25-34-710-042).

5. Close-up
Subtask 73-25-34-410-052-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Close the access door 824 (Ref. AMM TASK 52-41-00-410-002).
(2) Remove the access platform(s).

[Rev.10 from 2021] 2026.04.01 03:01:32 UTC