Removal of the Engine Interface Unit (EIU) [CFMB]

TASK 73-25-34-000-040-B
Removal of the Engine Interface Unit (EIU)

FIN: 1KS1 ** ON A/C NOT FOR ALL
FIN: 1KS2 ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
824

C. Referenced Information

REFERENCE	DESIGNATION
Engine Interface Unit

3. Job Set-up
Subtask 73-25-34-865-052-A ** ON A/C NOT FOR ALL

WARNING: OPEN THE PROBE HEATER CIRCUIT-BREAKERS 1DA1(2), 3DA1(2,3), 4DA1(2,3) AND 5DA1(2,3) BEFORE ENG1(2)FADEC A and EIU 1(2) C/B'S 2KS1 AND 2KS2. IF YOU DO NOT OBEY THIS SEQUENCE:

THE PROBES WILL BECOME TOO HOT.
THIS CAN CAUSE DAMAGE TO EQUIPMENT AND INJURY TO MAINTENANCE PERSONNEL.

WARNING: OPEN CIRCUIT BREAKERS 2KS1 AND 2KS2 AFTER YOU OPEN THE IGNITION CIRCUIT BREAKERS. IF NOT, THE CONTINUOUS IGNITION SYSTEM WILL BE ACTIVATED.

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	COM/CVR/SPLY	2RK	E14
49VU	COM/CVR/CTL	4RK	E13
** ON A/C NOT FOR ALL
49VU	ANTI ICE/PROBES/AOA/1	4DA1	D04
49VU	ANTI ICE/PROBES/PITOT/1	3DA1	D02
** ON A/C NOT FOR ALL
49VU	ANTI ICE/RAIN/RPLNT/CAPT	1DB1	D01
** ON A/C NOT FOR ALL
49VU	COM/CVR/SPLY	23RK	E14
49VU	COM/CVR/CTL	26RK	E13
** ON A/C NOT FOR ALL
121VU	RCDR/DFDR	7TU	K16
122VU	ANTI ICE/WINDOWS/R	4DG2	W14
122VU	ANTI ICE/WINDOWS/L	4DG1	X14
122VU	ANTI ICE/PROBES/2/TAT	1DA2	Y15
122VU	ANTI ICE/PROBES/2/PITOT	3DA2	Y14
122VU	ANTI ICE/PROBES/2/AOA	4DA2	Y13
122VU	ANTI ICE/PROBES/2/STATIC	5DA2	Y11
122VU	ANTI ICE/PROBES/3/PITOT	3DA3	Z16
122VU	ANTI ICE/PROBES/3/AOA	4DA3	Z15
122VU	ANTI ICE/PROBES/3/STATIC	5DA3	Z14
122VU	ANTI ICE/PROBES/1/STATIC	5DA1	Z13
122VU	ANTI ICE/PROBES/1/TAT	1DA1	Z12
** ON A/C NOT FOR ALL
122VU	ANTI ICE/RAIN/RPLNT/F/O	1DB2	W11
** ON A/C NOT FOR ALL
FOR FIN: 1KS1 (EIU1)
49VU	ENGINE/1/FADEC A/AND EIU 1	2KS1	A04
49VU	ENGINE/1 AND 2/IGN/SYS A	1JH	A03
121VU	ENGINE/IGN/ENG1/SYS B	3JH1	P41
121VU	ENGINE/IGN/ENG1/SYS A BAT	2JH1	P39
121VU	ENGINE/ENG1/FADEC B/AND EIU 1	4KS1	R41
FOR FIN: 1KS2 (EIU2)
49VU	ENGINE/2/FADEC A/AND EIU 2	2KS2	A05
49VU	ENGINE/1 AND 2/IGN/SYS A	1JH	A03
121VU	ENGINE/IGN/ENG2/SYS B	3JH2	P42
121VU	ENGINE/IGN/ENG2/SYS A BAT	2JH2	P40
121VU	ENGINE/ENG2/FADEC B	4KS2	Q40

Subtask 73-25-34-941-050-A ** ON A/C NOT FOR ALL

B. Put the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position.

Subtask 73-25-34-010-050-A ** ON A/C NOT FOR ALL

C. Open the access door 824

4. Procedure
Subtask 73-25-34-020-050-A ** ON A/C NOT FOR ALL

A. Loosen the knurled nuts (5).
(1) Lower the knurled nuts (5) to free the hooks (4).
(2) Pull the engine interface unit (1) with the handle (3) until the connector (6) is disconnected.
(3) Remove the engine interface unit (1) from its support (2).
(4) Put the CAP - BLANKING on the electrical connectors.

[Rev.10 from 2021] 2026.04.01 02:59:41 UTC