Inspection of the Igniter Cable in the Area Adjacent to the FH01 Tube for Chafing [PW11]
TASK 73-11-00-210-806-A
Inspection of the Igniter Cable in the Area Adjacent to the FH01 Tube for Chafing
Refer to the MPD TASK: 731100-W1
INSPECTION OF THE IGNITER CABLE IN THE AREA ADJACENT TO THE FH01 TUBE FOR CHAFING.
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 73-11-00-941-059-A ** ON A/C NOT FOR ALL
Subtask 73-11-00-410-056-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 03:01:53 UTC
Inspection of the Igniter Cable in the Area Adjacent to the FH01 Tube for Chafing
WARNING:
BE CAREFUL WHEN YOU DO WORK ON THE ENGINE AFTER SHUTDOWN. THE ENGINE CAN STAY HOT FOR A LONG TIME. IF YOU DO NOT OBEY THIS INSTRUCTION, INJURY CAN OCCUR.
1. Reason for the JobRefer to the MPD TASK: 731100-W1
INSPECTION OF THE IGNITER CABLE IN THE AREA ADJACENT TO THE FH01 TUBE FOR CHAFING.
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1) | |
| 437AL, 438AR, 451AL, 452AR | |
| FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2) | |
| 447AL, 448AR, 461AL, 462AR | |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 71-00-00-860-833-A | Procedure to Prevent Engine Motoring |
| TASK 71-13-00-010-802-A | Opening of the Fan Cowl Doors |
| TASK 71-13-00-410-802-A | Closing of the Fan Cowl Doors |
| TASK 78-30-00-040-805-A | Deactivation of the Thrust Reverser System for Ground Maintenance |
| TASK 78-30-00-440-805-A | Reactivation of the Thrust Reverser System after Ground Maintenance |
| TASK 78-36-00-010-802-A | Opening of the Thrust Reverser Cowl-Doors |
| TASK 78-36-00-410-802-A | Closing of the Thrust Reverser Cowl-Doors |
Subtask 73-11-00-941-059-A ** ON A/C NOT FOR ALL
A. Safety Precautions
(1) Do the procedure to prevent engine motoring
(Ref. AMM TASK 71-00-00-860-833)
Subtask 73-11-00-010-065-A ** ON A/C NOT FOR ALL (1) Do the procedure to prevent engine motoring
(Ref. AMM TASK 71-00-00-860-833)
B. Get Access
(1) Open the fan cowl doors (Ref. AMM TASK 71-13-00-010-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
437AL 438AR
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
447AL 448AR
Subtask 73-11-00-040-057-A ** ON A/C NOT FOR ALL (1) Open the fan cowl doors (Ref. AMM TASK 71-13-00-010-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
437AL 438AR
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
447AL 448AR
C. Deactivation of the Thrust Reverser for Maintenance
Subtask 73-11-00-010-066-A ** ON A/C NOT FOR ALL WARNING:
YOU MUST DEACTIVATE THE THRUST REVERSER BEFORE YOU DO WORK ON OR AROUND IT. IF YOU DO NOT, THE THRUST REVERSER CAN OPERATE ACCIDENTALLY AND CAUSE AN INJURY AND/OR DAMAGE.
(1) Do the deactivation of the thrust reverser system for maintenance (Ref. AMM TASK 78-30-00-040-805). D. Get Access
(1) Open the thrust reverser cowl-doors (Ref. AMM TASK 78-36-00-010-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
451AL 452AR
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
461AL 462AR
4. Procedure(1) Open the thrust reverser cowl-doors (Ref. AMM TASK 78-36-00-010-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
451AL 452AR
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
461AL 462AR
CAUTION:
WIPE CLEAN ALL PARTS AND TOOLS AS NECESSARY TO REMOVE UNWANTED DEBRIS AND PREVENT DAMAGE TO THE ENGINE.
Subtask 73-11-00-210-058-A ** ON A/C NOT FOR ALL A. Do a visual inspection of the igniter cable in the area adjacent to the FH01 tube for chafing as follows: See Table 601.
(1) Examine the fuel pressure tube (FH01) for clearance and chafing with the igniter cable.
(a) If the clearance is not in the specified limits, adjust the cable length through the spring clips to make more clearance with the tube.
Table 601 - Igniter Cable Inspection
(2) Examine the assembly for foreign objects, damage and correct assembly.
5. Close-up(1) Examine the fuel pressure tube (FH01) for clearance and chafing with the igniter cable.
(a) If the clearance is not in the specified limits, adjust the cable length through the spring clips to make more clearance with the tube.
Table 601 - Igniter Cable Inspection
| EXAMINE | DAMAGE | DISPOSITION |
|---|---|---|
| Fuel pressure tube (FH01) | Chafing | Visual indications of chafing between the tube (FH01) and igniter cable are not permitted. |
| | Clearance | The clearance between the tube (FH01) sections with no support and the igniter cable must be a minimum of 0.12 in. (3.05 mm). |
Subtask 73-11-00-410-056-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close the thrust reverser cowl-doors (Ref. AMM TASK 78-36-00-410-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
451AL 452AR
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
461AL 462AR
Subtask 73-11-00-440-057-A ** ON A/C NOT FOR ALL (1) Make sure that the work area is clean and clear of tools and other items.
(2) Close the thrust reverser cowl-doors (Ref. AMM TASK 78-36-00-410-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
451AL 452AR
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
461AL 462AR
B. Do the reactivation of the thrust reverser system after maintenance (Ref. AMM TASK 78-30-00-440-805).
Subtask 73-11-00-410-057-A ** ON A/C NOT FOR ALL
Inspection of Igniter Cable in the Area Adjacent to the FH01 Tube for Chafing