W DOC AIRBUS | AMM A320F

Removal of the Navigation-Light Glazing Panel


TASK 57-37-12-000-802-A
Removal of the Navigation-Light Glazing Panel


1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
AR
ACCESS PLATFORM 4M (13 FT)
No specific
AR
SAFETY BARRIER(S)
No specific
AR
SAFETY CLIP - CIRCUIT BREAKER
No specific
AR
WARNING NOTICE(S)
98D27803500001
1
LOCKING TOOL ZERO POS
 B. Referenced Information
REFERENCE
DESIGNATION
3. Job Set-up
Subtask 57-37-12-941-053-A ** ON A/C NOT FOR ALL
A. Safety Precautions
   (1) As necessary, use the applicable SAFETY BARRIERS, specified by the operator's instructions and your local regulations.
   (2) Install the 98D27803500001 LOCKING TOOL ZERO POS on the flap/slat control lever.
   (3) Put WARNING NOTICE(S) in the cockpit to tell persons not to operate the flaps or slats.
   (4) Put the ACCESS PLATFORM 4M (13 FT) below the applicable wing tip, zone 534(634).
Subtask 57-37-12-865-053-A ** ON A/C NOT FOR ALL
B. Open, safety and tag this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
122VULIGHTING/EXT LT/NAV1/AND LOGO/LT1LAT03
** ON A/C NOT FOR ALL
122VULIGHTING/EXT LT/NAV2/AND LOGO/LT2LAT02
122VULIGHTING/WING/STROBE10LVV05
** ON A/C NOT FOR ALL
122VULIGHT/EXT LT NAV1/AND LOGO/LT1LAT03
4. Procedure
Subtask 57-37-12-020-051-D ** ON A/C NOT FOR ALL
A. Removal of the Navigation-Light Glazing Panel
   (1) Remove the bolts (4).
   (2) Remove the glazing panel (5).
Subtask 57-37-12-020-051-E ** ON A/C NOT FOR ALL
A. Removal of the Navigation-Light Glazing Panel
   (1) Remove the bolts (7).
   (2) Remove the glazing panel (8).
   (3) If necessary, remove the seal (6) from the aircraft structure/component interface.
[Rev.10 from 2021] 2026.04.02 06:43:26 UTC