W DOC AIRBUS | AMM A320F

Removal of the Slat-track Cans 1 thru 12


TASK 57-24-11-000-002-A
Removal of the Slat-track Cans 1 thru 12


WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON OR NEAR:
  • THE FLIGHT CONTROLS
  • THE FLIGHT CONTROL SURFACES
  • THE LANDING GEAR AND THE RELATED DOORS
  • COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR CAN CAUSE DAMAGE TO THE EQUIPMENT.
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
AR
ACCESS PLATFORM 4M (13 FT)
No specific
AR
SAFETY BARRIER(S)
No specific
AR
WARNING NOTICE(S)
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
540AB, 540BB, 540DB, 540FB, 540HB, 540LB, 540NB, 540RB, 550BB, 550DB, 640AB, 640BB, 640DB, 640FB, 640HB, 640LB, 640NB, 640RB, 650BB, 650DB
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 27-80-00-866-004-A
Extending the Slats on the Ground
TASK 27-84-61-000-001-A
Removal of the Slat Tracks 1 thru 4
TASK 27-84-62-000-001-A
Removal of the Slat Tracks 5 thru 12
TASK 27-84-63-000-001-A
Removal of the No. 1 Slat
TASK 27-84-64-000-001-A
Removal of the No. 2 Slat
TASK 27-84-65-000-001-A
Removal of the No 3 Slat
TASK 27-84-66-000-001-A
Removal of the No. 4 Slat
TASK 27-84-67-000-001-A
Removal of the No. 5 Slat
TASK 28-00-00-000-001-A
Removal of the Fuel Pipes
TASK 28-10-00-910-001-A
Safety Procedures When You Do Work in a Fuel Tank
TASK 28-10-00-910-002-A
Access to the Fuel Tanks and the Work Areas
TASK 28-12-46-000-001-A
Removal of the Overpressure Protector Outlet
TASK 57-27-11-000-001-A
Removal of the Access Panel
TASK 57-27-11-000-002-A
Removal of the Access Panel
3. Job Set-up
Subtask 57-24-11-941-052-A
A. Safety Precautions
WARNING: BEFORE YOU DO WORK IN OR NEAR A FUEL TANK, MAKE SURE THAT YOU OBEY ALL THE SAFETY PROCEDURES. THIS WILL PREVENT INJURY TO PERSONS AND/OR DAMAGE TO THE AIRCRAFT.
   (1) Obey the fuel safety procedures (Ref. AMM TASK 28-10-00-910-001) when you do work in the fuel tanks.
   (2) As necessary, use the applicable SAFETY BARRIERS, specified by the operator's instructions and your local regulations.
   (3) Put WARNING NOTICE(S) in the cockpit to tell persons not to operate the flap/slat system or the fuel system.
Subtask 57-24-11-860-050-A
B. Aircraft Maintenance Configuration
WARNING: MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS SURFACES ARE CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE TO EQUIPMENT.
   (1) Fully extend the slats (Ref. AMM TASK 27-80-00-866-004).
   (2) Make sure that the 98D27803000000 LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION is installed on the flap/slat control lever.
Subtask 57-24-11-010-052-B ** ON A/C NOT FOR ALL
C. Get Access
   (1) Put the ACCESS PLATFORM 4M (13 FT) in position below the applicable slat-track and the adjacent access panel, zone 540(640).
   (2) If necessary, remove the applicable slats:
   (3) If necessary, remove the applicable slat tracks:
   (4) Remove the applicable access panel:
     (a) For the slat-track cans 1, 2, 3, 5 and 6, (Ref. AMM TASK 57-27-11-000-001) (Ref. AMM TASK 28-12-46-000-001) and (Ref. AMM TASK 28-10-00-910-002):
  • For the slat-track cans 1 and 2, remove 540AB ( 640AB)
  • For the slat-track can 3, remove 540BB ( 640BB)
  • For the slat-track can 5, remove 540DB ( 640DB)
  • For the slat-track can 6, remove 540FB ( 640FB).
     (b) For the slat-track cans 7 thru 12, (Ref. AMM TASK 57-27-11-000-002) and (Ref. AMM TASK 28-10-00-910-002):
   (5) If necessary, remove the applicable fuel pipes (Ref. AMM TASK 28-00-00-000-001).
Subtask 57-24-11-010-052-C ** ON A/C NOT FOR ALL
C. Get Access
   (1) Put the ACCESS PLATFORM 4M (13 FT) in position below the applicable slat-track and the adjacent access panel, zone 540(640).
   (2) If necessary, remove the applicable slats
   (3) If necessary, remove the applicable slat tracks:
   (4) Remove the applicable access panel:
     (a) For the slat-track cans 1, 2, 3, 5 and 6, (Ref. AMM TASK 57-27-11-000-001) and (Ref. AMM TASK 28-10-00-910-002):
  • For the slat-track cans 1 and 2, remove 540AB ( 640AB)
  • For the slat-track can 3, remove 540BB ( 640BB)
  • For the slat-track can 5, remove 540DB ( 640DB)
  • For the slat-track can 6, remove 540FB ( 640FB).
     (b) For the slat-track cans 7 thru 12, (Ref. AMM TASK 57-27-11-000-002) and (Ref. AMM TASK 28-10-00-910-002):
   (5) If necessary, remove the applicable fuel pipes (Ref. AMM TASK 28-00-00-000-001).
Subtask 57-24-11-010-052-D ** ON A/C NOT FOR ALL
C. Get Access
   (1) Put the ACCESS PLATFORM 4M (13 FT) in position below the applicable slat-track and the adjacent access panel, zone 540(640).
   (2) If necessary, remove the applicable slats:
   (3) If necessary, remove the applicable slat tracks:
   (4) Remove the applicable access panel:
     (a) For the slat-track cans 1 thru 6, (Ref. AMM TASK 57-27-11-000-001) (Ref. AMM TASK 28-12-46-000-001) and (Ref. AMM TASK 28-10-00-910-002):
  • For the slat-track cans 1 and 2, remove 540AB ( 640AB)
  • For the slat-track cans 3 and 4, remove 540BB ( 640BB)
  • For the slat-track can 5, remove 540DB ( 640DB)
  • For the slat-track can 6, remove 540FB ( 640FB).
     (b) For the slat-track cans 7 thru 12, (Ref. AMM TASK 57-27-11-000-002) and (Ref. AMM TASK 28-10-00-910-002):
   (5) If necessary, remove the applicable fuel pipes (Ref. AMM TASK 28-00-00-000-001).
4. Procedure
Subtask 57-24-11-020-057-C ** ON A/C NOT FOR ALL
A. Removal of the Slat-track Cans 1 thru 3
   (1) Disconnect the drain pipe (2) from the slat-track can (1).
   (2) Remove the bolts (3) and carefully remove the slat-track can (1).
NOTE: You must keep the bolts (3) in their related positions.
Subtask 57-24-11-020-057-D ** ON A/C NOT FOR ALL
A. Removal of the Slat-track Cans 1 thru 4
   (1) Disconnect the drain pipe (2) from the slat-track can (1).
   (2) Remove the bolts (3) and carefully remove the slat-track can (1).
NOTE: You must keep the bolts (3) in their related positions.
Subtask 57-24-11-020-058-C
B. Removal of the Slat-track Cans 5 and 6
   (1) Disconnect the drain pipe (17) from the slat-track can (16).
   (2) Remove the bolts (18) and carefully remove the slat-track can (16).
NOTE: You must keep the bolts (18) in their related positions.
Subtask 57-24-11-020-059-C
C. Removal of the Slat-track Cans 7 and 8
   (1) Disconnect the drain pipe (32) from the slat-track can (31).
   (2) Remove the bolts (33) and carefully remove the slat-track can (31).
NOTE: You must keep the bolts (33) in their related positions.
Subtask 57-24-11-020-060-C
D. Removal of the Slat-track Cans 9 and 10
   (1) Disconnect the drain pipe (47) from the slat-track can (46).
   (2) Remove the bolts (48) and carefully remove the slat-track can (46).
NOTE: You must keep the bolts (48) in their related positions.
Subtask 57-24-11-020-061-C
E. Removal of the Slat-track Cans 11 and 12
   (1) For the slat-track can 11:
  • disconnect the drain pipe (61) from the slat-track can (60).
  • remove the bolts (62)
  • carefully remove the slat-track can (60).
NOTE: You must keep the bolts (62) in their related positions.
   (2) For the slat-track can 12:
  • disconnect the drain pipe (71) from the slat-track can (70).
  • remove the bolts (72)
  • carefully remove the slat-track can (70).
NOTE: You must keep the bolts (72) in their related positions.
[Rev.10 from 2021] 2026.04.02 06:30:46 UTC